F4-MB Nozzle clarification
12-09-2011, 06:31 AM,
#1
F4-MB Nozzle clarification
Dear Members,

Is it possible to use "std" F-4MB nozzle in the place of Sulzer F4 - MB ( 7 mm ) "small " nozzle .If so any parameters to be changed for optimal spray.

I will be thankful if you could clarify my doubt.

Regards,

Ravi
Reply
12-09-2011, 04:28 PM,
#2
RE: F4-MB Nozzle clarification
(12-09-2011, 06:31 AM)ravi_n59 Wrote: Dear Members,

Is it possible to use "std" F-4MB nozzle in the place of Sulzer F4 - MB ( 7 mm ) "small " nozzle .If so any parameters to be changed for optimal spray.

I will be thankful if you could clarify my doubt.

Regards,

Ravi

You should not find important difference, but with a 6mm anode the plasma gas will have higher speed than with the 7mm, this will reduce the heat exchange with the powder, this is probably better for metals powder and less interesting for ceramic powders.

Olivier

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Nozzle Cleaning Andy_81 2 5,542 10-23-2010, 01:36 AM
Last Post: Andy_81
  SM 3MB Gun with GP Nozzle ykang 7 10,852 06-03-2009, 12:27 PM
Last Post: LEN WOOD



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd