Hello Mr.Gordon,
I have joined your forum recently in may'08. I have a twin wire arc spray and HVOF HIPOJET2100 and a 6axis Kuka Robot alongwith the necessary paraphernelia. My project keyman who conceived and procured this equipment left me abruptly, before takeoff. Since then
I had started learning about this thermal spray by reading books and the internet, I registered myself in your SEForum the moment I heard
of it and I,m reading most of your old postings.Now I began understanding this subject and also I have a customer offering me a
few TBC jobs.Now my doubt is can my HIPOJET 2100 handle Yitria stabilised Zirconium oxide. Could you kindly clear my doubt.If your answer is yes, then fine I can go ahead, if not what must I do? I must inevitably go for an APS system. At this juncture I cannot afford a brand new Plasma system, so I,m on the lookout for a used
equipment and in my search I landed in your forum.Your posting on 03-19-2007 reads about a 10 year old system in poland. I would like to know if this equipment is still available, if so can you help me in making contact with the seller.
If not can anybody in the forum lead me to a second hand Atmospheric Plasma Spray equipment.If things workout maybe I can
express my gratitude monetarily also.
As a last alternative if you could help me with the design,
I can dare to make my own.
Thank you
Regards
Sharvan
Gordon Wrote:For sale:
Sulzer Metco special purpose semi-automatic thermal spray system. Was used to molybdenum coat synchromesh rings for gear boxes. This equipment is about 10 years old and said to be in good condition and little used.
The system comprises of 2 type 5K guns with type 6CE control units, booths, automatic handling and grit blasting equipment, complete except for extraction/filtration equipment.
The seller is based in Poland. Please see links to some photographs below. For more information please email.
Photo1
Photo2
Photo3
Photo4
Photo5
Photo6
Photo7
Photo8
Photo9
Photo10
Photo11