Diamond grinding problem
06-17-2011, 08:33 PM,
#1
Diamond grinding problem
Dear Sef members,

We have a problem about diamond grinding wheels.Our Diamond grinding wheel's surface was shedding(poured). How can we to set-square (sharpening) the surface of the diamond wheel.

I think the problem has occurred because it touches the metal surface. How can we fix this problem? How to sharpen the surface of the diamond wheel.

Reply
06-22-2011, 01:15 AM,
#2
RE: Diamond grinding problem
Hi Metallurgy_eng

I'm no expert on this, but I think you need to get a dressing tool.

(link dead)
Reply
09-03-2011, 03:20 PM,
#3
RE: Diamond grinding problem
Hi Metallurgy_ engg

You can dress up your diamond grinding wheel with white wheel (i.e Aluminum Oxide Wheel which will be used for metal substrate grinding).

We are regularly doing same thing to dress up all our diamond grinding wheels and results are very good.

Regards,
sreenivas
Reply
09-09-2011, 08:46 AM,
#4
RE: Diamond grinding problem
Manual dressing of the grinding wheels could be done by mounting the wheel dresser on the grinder table. Bring the rotating grinding wheel up close to the diamond .Never dress without coolant.
Reply
09-14-2011, 09:10 AM,
#5
RE: Diamond grinding problem
Dear Metallurgy_eng
"Greasing" is eliminated by dressing surface of diamond wheel by mild abrasive stone from Al2O3.At the same time you remove a bond between the diamond grains and do not spoil yourself grain.This is the easiest option.More complex is the electro-erosion dressing.The digits are removed bond, but do not touch the diamond grains.
Our firm A.Termika Ltd uses manufacturing of diamond grinding wheels by deposition an abrasive layer by flame spray. Deposited mix from bond and diamond powder.

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Diamond Grinding Met.Eng. 8 9,861 04-21-2022, 10:41 AM
Last Post: Artyom
  Diamond Wheel Selection Met.Eng. 1 3,393 06-01-2016, 04:11 PM
Last Post: shantanu
  Diamond containing wear-resist HVOF coatings Boris Eizner 0 3,396 12-23-2014, 08:47 AM
Last Post: Boris Eizner
  Diamond Lapping Superfinish films Met.Eng. 1 3,510 12-14-2014, 09:52 AM
Last Post: Stephen Booth
  Convert Diamond Jet from Propylene to Propane LEN WOOD 2 4,658 05-29-2013, 01:59 AM
Last Post: LEN WOOD
  Grinding material novakmichal86 0 7,193 10-24-2012, 08:25 AM
Last Post: novakmichal86
  Diamond Jet Air Flow Hunter85 2 6,137 02-16-2012, 07:56 AM
Last Post: alberto
  APS - Diamond film plasmajet1990 6 9,535 09-12-2008, 01:59 PM
Last Post: plasmajet1990
  Diamond Like Coating Peterpan 3 8,372 02-07-2007, 06:10 AM
Last Post: drramc



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd