Diamond Jet Air Flow
02-12-2010, 03:57 AM,
#1
Diamond Jet Air Flow
I am new to running a DJ2600 system. Can you tell me if there are any published works discussing the effects of increasing / decreasing the Air flow in this Gun. All of the parameters that I see have the Air flow at 44% to 50%.

Thanks for your help.
Reply
03-01-2010, 01:56 PM,
#2
RE: Diamond Jet Air Flow
Hi Hunter85

Sign0016 to the Surface Engineering Forum.

Not been able to find much on this topic. Nearly all publish parameter optimisation work I've come across tends to concentrate on fuel/oxygen flows/ratios, spray distance and spray rates as the variable factors. Air flow for some reason is usually set as a constant from recommended parameters. Air flow is a critical parameter, apart from providing cooling to the air cap, it will influence gas/particle velocity/temperature. It will also influence any tendency for air cap fouling.
Reply
02-16-2012, 07:56 AM,
#3
RE: Diamond Jet Air Flow
I have that problem nowdays,
I am trying to spray Diamlloy 4004NS (Ni 14%Cr 18%Fe 9,5%Co 5%Ti 4%Mo 4%W 3%Al )

My parameters:
H2 (metco flow unit): 60
O2 (metco flow unit): 29
H2/ ( O2+ air*0,2) : 1,76
Air (metco flow unit): 25
N2-carrier (metco flow unit): 25
SD : 310 mm

I began to reach suitable microstructure with these parameters..
However; I have a build up problem on air cap at each 10 passes most probabaly less air flow as sroud gas..
Can I get the same microstructure, İf I increase air flow and decrease O2 flow prowiding that h2/ o2 is constant to prevent air cap fouling..


Regards;



Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Diamond Grinding Met.Eng. 8 9,861 04-21-2022, 10:41 AM
Last Post: Artyom
  Diamond Wheel Selection Met.Eng. 1 3,393 06-01-2016, 04:11 PM
Last Post: shantanu
  Diamond containing wear-resist HVOF coatings Boris Eizner 0 3,395 12-23-2014, 08:47 AM
Last Post: Boris Eizner
  Diamond Lapping Superfinish films Met.Eng. 1 3,509 12-14-2014, 09:52 AM
Last Post: Stephen Booth
  Sense Powder flow k09 19 20,136 09-12-2013, 01:59 AM
Last Post: Esteban
  Convert Diamond Jet from Propylene to Propane LEN WOOD 2 4,657 05-29-2013, 01:59 AM
Last Post: LEN WOOD
  DJ2700 low fuel gas flow guang 1 4,165 12-23-2012, 04:30 PM
Last Post: Gordon
  powder flow not coaxial (HELP!) CHI3 6 6,935 09-13-2012, 02:37 PM
Last Post: loriolo
  Diamond grinding problem Met.Eng. 4 7,219 09-14-2011, 09:10 AM
Last Post: a.termika.ltd
  Pulsing powder flow TurbineRepair 6 9,759 01-09-2009, 05:00 PM
Last Post: *Plasma Junkie*
  APS - Diamond film plasmajet1990 6 9,535 09-12-2008, 01:59 PM
Last Post: plasmajet1990
  Diamond Like Coating Peterpan 3 8,371 02-07-2007, 06:10 AM
Last Post: drramc



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd