Delamination of Aluminium Polyester Coating
01-23-2008, 04:06 PM,
Delamination of Aluminium Polyester Coating
Hi, Gondon and everyone:

Delamination always occurs in our Aluminium Silicon /Polyester Abradable Coating (Metco 601 NS). The delamination were found in the side surface of the coating after turning process and the size of the cracks increased sometimes after a further heat treatment at 300 Celsius degree for 3 hours. The delaminations are roughly 5~ 50 mm in length.

We are not sure if the delamination was a result of coating problem or it was caused by an unsuitable machining process. The HR15Y hardness and tensile bond strength of the coating are approximately 68 and 8~9 MPa, respectively. Porosity is 3% max. Aluminum silicon alloy phase is about 52%. The thickness of the as sprayed coating is 4~6 mm.
Any suggestion and idea would be appreciated.
01-27-2008, 08:19 PM,
RE: Delamination of Aluminium Polyester Coating
Hi fhyuan

It would certainly be worth looking at your machining process. It is important that the coating is cleanly cut and not burnished.

Problems with the coating could be an issue. See following threads:
Uneven distribution-Al polyester coating
Delamination in Polyester B50TF222 top coat

Can you provide a photograph of your problem?

Possibly Related Threads…
Thread Author Replies Views Last Post
  Problem solved Metcoâ„¢ 2042 - CoNiCrAlY-BN / Polyester Abradable CSchwie 5 8,277 06-01-2017, 09:03 AM
Last Post: Tribologist_CH
  T800 coating delamination alvliew 5 3,294 05-05-2017, 02:54 AM
Last Post: KevinS
  Coating delamination problem texnicar 13 7,488 07-07-2015, 10:37 PM
Last Post: Johnny_Blaze
  45VFNS Delamination Meeker77 2 2,609 05-24-2015, 05:46 PM
Last Post: Meeker77
  Surface Preparation of Aluminium acidic 2 3,199 05-09-2015, 01:59 PM
Last Post: CHI3
  Delamination BatuhanCemreAyas 2 2,858 01-02-2014, 06:30 AM
Last Post: sprayjet
  delamination in the coating codep 3 4,851 05-15-2013, 05:04 PM
Last Post: Gordon
  Machining aluminium bronze hvof coating Orion 2 5,149 08-23-2012, 12:22 PM
Last Post: Orion
  Uneven distribution-Al polyester coating fhyuan 16 13,513 01-21-2012, 06:57 PM
Last Post: Gordon
  Cr3C2 Ni-Cr coating on Aluminium ehsan 4 5,079 10-19-2011, 12:50 PM
Last Post: ehsan
  delamination in general epilson 1 2,911 06-21-2011, 07:45 PM
Last Post: Gordon
  coating aluminium composite panel nicubila 2 7,083 12-13-2010, 08:14 AM
Last Post: Fydor75
  Thermoconductive super-hydrophobic coating of Aluminium cyphyus 8 9,074 08-03-2010, 06:43 PM
Last Post: cyphyus
  APS WC coating delamination brianf121 2 3,994 07-22-2010, 04:30 PM
Last Post: brianf121
  Coating freak Off From Aluminium Eagleman 5 4,886 04-25-2010, 02:29 PM
Last Post: Gordon

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd