Delamination in Polyester B50TF222 top coat
05-03-2007, 03:43 PM,
#1
Delamination in Polyester B50TF222 top coat
Hello everyone,

We are spraying Polyester top coat with Metco 450 bond coat on an inside diameter, at least 0.080" thick. We are running the metlab coupon with the part (rotating). I have the following:

1st shift: 2 operators
2nd shift: 2 operators
3rd shift: 1 operator

The problem I am having with my 3rd shifter is his metallographic is showing a delamination/separation in the first 0.005" of the Polyester top coat. This problem is only in his coating. Here are some of the theories being passed around:

1. The operator is spraying the coating on in one setting, with no cool down periods and no stops all the way until 0.080", which is causing stress on the coating.

2. He is using only one cooling air nozzle on the part, instead of two...or he is positioning the nozzle in a ineffective location.

Here is the metlab picture:[img]C:\Documents and Settings\a271tqt\Desktop[/img]

Do you think this is an application problem in the sense that the operator is hitting the "go" button and sprays to the full thickness? Or is this even a stress issue?

Thanks,

John
Reply
05-03-2007, 05:52 PM,
#2
RE: Delamination in Polyester B50TF222 top coat
Hi John

It does sound like your operator is doing something that he shouldn't. Does he have any incentives to try taking short cuts? I would certainly keep a close eye on him, as silicon aluminium/polyester (Metco 601) is a very tolerant coating normally (I have sprayed 601 to well in excess of 1" or 25 mm in thickness with no problems).

John, could you email your met lab picture to me and I will place it in your post above.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Metallic HVOF bond coat to TBC APS top coat Gas turbines achmadarifudinh 0 679 07-08-2019, 08:34 AM
Last Post: achmadarifudinh
  Recomended bond coat for Metco 81 VFNS top coat achmadarifudinh 4 1,604 06-11-2018, 06:17 AM
Last Post: demionkrishan
  Problem solved Metcoâ„¢ 2042 - CoNiCrAlY-BN / Polyester Abradable CSchwie 5 8,277 06-01-2017, 09:03 AM
Last Post: Tribologist_CH
  T800 coating delamination alvliew 5 3,294 05-05-2017, 02:54 AM
Last Post: KevinS
  Coating delamination problem texnicar 13 7,488 07-07-2015, 10:37 PM
Last Post: Johnny_Blaze
  45VFNS Delamination Meeker77 2 2,609 05-24-2015, 05:46 PM
Last Post: Meeker77
  Delamination in the bond coat sprayed on a Ti specimen Justin 9 7,623 01-06-2014, 10:00 PM
Last Post: KevinS
  Delamination BatuhanCemreAyas 2 2,858 01-02-2014, 06:30 AM
Last Post: sprayjet
  delamination in the coating codep 3 4,851 05-15-2013, 05:04 PM
Last Post: Gordon
  Uneven distribution-Al polyester coating fhyuan 16 13,513 01-21-2012, 06:57 PM
Last Post: Gordon
  Possibility Study to use Stellite - 306 Bond Coat for 75Cr3C2 -25NiCr Top Coat -Reg sreenuvundela 2 4,549 09-14-2011, 05:36 AM
Last Post: sreenuvundela
  delamination in general epilson 1 2,911 06-21-2011, 07:45 PM
Last Post: Gordon
  APS WC coating delamination brianf121 2 3,994 07-22-2010, 04:30 PM
Last Post: brianf121
  Inco 718 complete delamination!! TurbineWorks 5 7,011 06-15-2008, 03:28 PM
Last Post: Gordon
  Delamination bgmach 2 4,936 04-04-2008, 02:49 PM
Last Post: Vijay Deshpande



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd