Dark surface after grinding of plasma tungsten carbide coating
05-31-2017, 10:59 AM,
#1
Dark surface after grinding of plasma tungsten carbide coating
Hi,

I am doing cylindrical grinding on shaft, plasma coated with tungsten carbide cobalt powder (Metco72F-NS-1).
Sometimes the final product after grinding shows a dark surface instead of the usual bright and shiny surface. Does anyone have experience with this kind of occurrence in their grinding process?

Thanks
Reply
05-31-2017, 12:07 PM,
#2
RE: Dark surface after grinding of plasma tungsten carbide coating
Hi Lazha

I could not know identify your problem, because you don't told what system and gun did you used an parameters set, because spray of WcCo with plasma isn't too easy, it's better with HVOF, so I could suppose that the problem could be too much fines in the powder, powder feeding inadequate, with not correct spray geometry
Best regards
Luigi
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
Lightning WC10Co4Cr HVOF coating leaves some lumps on the surface tobjung 1 454 10-17-2023, 07:32 AM
Last Post: Vadim Verlotski
  Tungsten Carbide Microfinish engineerraj 15 16,673 02-17-2023, 09:41 PM
Last Post: J!m
Photo Pitting in HVOF Tungsten Carbide mrobie 4 2,274 08-31-2022, 02:08 PM
Last Post: Red Baron
  Diamond Grinding Met.Eng. 8 9,878 04-21-2022, 10:41 AM
Last Post: Artyom
  Request for solution to reduce porosity in HVOF Tungsten Carbide Coatings sreenuvundela 7 12,288 07-22-2020, 08:01 AM
Last Post: Simon Kim
  Tungsten Carbide HVOF Removal PrecisionCarbide 9 14,147 02-24-2020, 11:17 AM
Last Post: Packiaraj Mutharasu
  Chrome-Carbide coating issue DanyGans 11 10,386 10-08-2019, 05:19 PM
Last Post: Lemster68
Lightbulb Problem solved Grinding solution for Hastalloy HVOF coating plzc126330 3 4,266 05-28-2019, 01:08 PM
Last Post: velocity
  surface speed for HVOF coating process gito 8 5,576 05-03-2019, 01:08 PM
Last Post: Lemster68
  remove tungsten coating gito 1 2,363 03-22-2019, 10:12 PM
Last Post: sprayloud
  roller surface high roughness Tungsten carbide coating Ra 0.15-0.3mm zhuminkun 6 5,082 02-08-2019, 04:59 AM
Last Post: Taz
  Coating for cyclone internal surface Arturas 0 1,883 12-11-2018, 06:58 AM
Last Post: Arturas
  grinding wheel for stellite 6 hvof coating raviswanadha 8 17,993 12-07-2018, 01:15 AM
Last Post: achmadarifudinh
  Wire with dark colour finish pcdmt 0 1,810 12-04-2018, 09:23 AM
Last Post: pcdmt
  Remove HVOF Coating in airfoil surface blade achmadarifudinh 5 3,846 07-20-2018, 10:51 AM
Last Post: achmadarifudinh



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd