DJ2700 low fuel gas flow
12-20-2012, 08:33 AM,
#1
DJ2700 low fuel gas flow
Our DJ2700 system has worked 8 years. Recent years a serious problem about the fuel gas flow happened. Our lab use propane as fuel gas and we use heater and vaporiser to heat the propane, the gas pressure can usually reach 100 psi. But the problem is that the propane gas flow is never higher than 20 FMR. This puzzle me. Can any one give some ideas? Thank you!ToungueHappy0193
The pressure and gas flow rate of air, oxygen and propane are 100psi/55FMR, 150psi/30FMR and 100psi/15FMR respectively now.
Reply
12-23-2012, 04:30 PM,
#2
RE: DJ2700 low fuel gas flow
Hi Guang

If you are maintaining 100psi propane pressure and have no liquid propane in the lines there should be no problem.

Check and calibrate regulator, flow meter, and flashback/non-return valves.
Check hoses are free of any restrictions that may impede flow.
Check gun and syphon plug for flow restrictions.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Problem solved Diamalloy 1010 with DJ2700 C3H6 plzc126330 0 689 09-21-2018, 05:31 AM
Last Post: plzc126330
  Torch Mounted Air Cooling for DJ2700 and F4 Stephen Booth 0 2,404 04-01-2014, 05:55 AM
Last Post: Stephen Booth
  Why Liquid fuel is better than Gas fuel in HVOF? dibyendudhara 3 10,768 12-30-2013, 02:36 PM
Last Post: derek
Shy flow rate conversion of propane in DJ2700 guang 1 3,578 12-16-2012, 11:52 PM
Last Post: KevGarty
  Diamond Jet Air Flow Hunter85 2 4,515 02-16-2012, 07:56 AM
Last Post: alberto
  O2/fuel ratio changes Intel55 5 6,172 03-13-2009, 10:11 AM
Last Post: landemarre
  Low DE of DJ2700 jeffsays163 7 7,856 08-05-2008, 05:19 PM
Last Post: Gordon
  Fuel for HVOF Panf 15 18,211 02-11-2008, 04:54 PM
Last Post: Stuart Milton
  DJ2700 & JKote Intel55 3 4,924 09-25-2007, 02:49 AM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd