DJ2700 low fuel gas flow
12-20-2012, 08:33 AM,
#1
DJ2700 low fuel gas flow
Our DJ2700 system has worked 8 years. Recent years a serious problem about the fuel gas flow happened. Our lab use propane as fuel gas and we use heater and vaporiser to heat the propane, the gas pressure can usually reach 100 psi. But the problem is that the propane gas flow is never higher than 20 FMR. This puzzle me. Can any one give some ideas? Thank you!ToungueHappy0193
The pressure and gas flow rate of air, oxygen and propane are 100psi/55FMR, 150psi/30FMR and 100psi/15FMR respectively now.
Reply
12-23-2012, 04:30 PM,
#2
RE: DJ2700 low fuel gas flow
Hi Guang

If you are maintaining 100psi propane pressure and have no liquid propane in the lines there should be no problem.

Check and calibrate regulator, flow meter, and flashback/non-return valves.
Check hoses are free of any restrictions that may impede flow.
Check gun and syphon plug for flow restrictions.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Oxy-fuel wire spray gun questions hje 5 4,030 01-26-2019, 05:58 PM
Last Post: plasmajet1990
  Problem solved Diamalloy 1010 with DJ2700 C3H6 plzc126330 0 2,188 09-21-2018, 05:31 AM
Last Post: plzc126330
  Liquid fuel hvof testing Parat Tech 0 3,161 05-19-2015, 10:50 AM
Last Post: Parat Tech
  Torch Mounted Air Cooling for DJ2700 and F4 Stephen Booth 0 3,434 04-01-2014, 05:55 AM
Last Post: Stephen Booth
  Why Liquid fuel is better than Gas fuel in HVOF? dibyendudhara 3 12,748 12-30-2013, 02:36 PM
Last Post: derek
  Sense Powder flow k09 19 20,148 09-12-2013, 01:59 AM
Last Post: Esteban
Shy flow rate conversion of propane in DJ2700 guang 1 4,937 12-16-2012, 11:52 PM
Last Post: KevGarty
  powder flow not coaxial (HELP!) CHI3 6 6,948 09-13-2012, 02:37 PM
Last Post: loriolo
  Diamond Jet Air Flow Hunter85 2 6,153 02-16-2012, 07:56 AM
Last Post: alberto
  Stoichiometric fuel ratio =λ Met.Eng. 1 11,150 01-14-2011, 08:44 PM
Last Post: Gordon
  The ratio of oxygen to fuel of Jet kote III wangqun72 5 9,654 09-02-2010, 06:18 PM
Last Post: wangqun72
  O2/fuel ratio changes Intel55 5 8,119 03-13-2009, 10:11 AM
Last Post: landemarre
  Pulsing powder flow TurbineRepair 6 9,768 01-09-2009, 05:00 PM
Last Post: *Plasma Junkie*
  Low DE of DJ2700 jeffsays163 7 9,996 08-05-2008, 05:19 PM
Last Post: Gordon
  Fuel for HVOF Panf 15 21,865 02-11-2008, 04:54 PM
Last Post: Stuart Milton



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd