DJ 2700 nozzle for hydrogen
10-22-2014, 06:21 PM,
#1
DJ 2700 nozzle for hydrogen
can somebody here tell that what is the basic difference in Internal Extension nozzle of SULZER DJ2700 in hydrogen and Propylene gas.
i already have an ID Extention but not sure which one it is? Atleast how can i identify that from propylene or hydrogen suitable nozzle with its outer look. any difference in the number of holes in front portion of nozzle?

Ravikumar
Reply
10-27-2014, 12:33 AM,
#2
RE: DJ 2700 nozzle for hydrogen
I would have thought the extension is just of the standard spray gun. So whatever nozzle you have in the front of your standard gun will be the same as the end of the extension?

So I assume you know what gas is going through your gun so just change the nozzle to suit ?

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Green flame in HVOF hydrogen - oxygen combustion JeroenB 3 830 05-07-2021, 01:24 PM
Last Post: JeroenB
  conversion from lpg/propane to hydrogen rmsengineering 0 1,341 12-15-2019, 02:46 PM
Last Post: rmsengineering
  parameter DJ GUN 2700 gito 0 1,238 03-26-2019, 03:28 AM
Last Post: gito
  HIPOJET 2700 PARAMETERS Danmarco 1 1,820 09-17-2018, 07:57 PM
Last Post: Met.Eng.
  SG-100 + ext. 2700 - spraying parameters Jaryn 1 2,338 11-27-2017, 02:21 PM
Last Post: Artyom
  DJ 2700 System Water cooled RV_DMG 3 4,601 03-14-2015, 05:05 AM
Last Post: Stephen Booth
  Converging Diverging Nozzle Edson 3 3,414 12-19-2014, 08:13 PM
Last Post: loriolo
  DJ 2700 is oxygen temperature important? Thomas 3 4,472 11-01-2012, 10:16 AM
Last Post: davclark
  F4-MB Nozzle clarification ravi_n59 1 3,677 12-09-2011, 04:28 PM
Last Post: landemarre
Information moisture in nozzle and on wire Christine 6 6,131 10-19-2011, 03:33 AM
Last Post: ServiceTech
  The Nozzle material of the spray gun? William 4 5,236 05-05-2011, 01:09 PM
Last Post: Gordon
  Nozzle Cleaning Andy_81 2 4,315 10-23-2010, 01:36 AM
Last Post: Andy_81
  Powder fluidity and injector clogging (DJ 2700 HVOF gun). pulaunias 7 10,787 04-19-2010, 03:16 PM
Last Post: Gordon
  F4 Nozzle/Electrode Wear Rich 7 9,733 04-16-2010, 05:29 PM
Last Post: Diucky
  SM 3MB Gun with GP Nozzle ykang 7 9,004 06-03-2009, 12:27 PM
Last Post: LEN WOOD



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd