Cutting blades for paper industry
09-29-2010, 12:14 PM,
#1
Cutting blades for paper industry
Hi everyone.

We will couting blades for paper industry. I did some research on the subject. In general, driving the process for doing this stuff. (3mm WC fastening plate.)

Now we want to coat 800 micron WC Co by HVOF system. Do you have engaged in work on the subject?
Reply
09-29-2010, 04:22 PM,
#2
RE: Cutting blades for paper industry
(09-29-2010, 12:14 PM)Metallurgy_eng Wrote: Hi everyone.

We will couting blades for paper industry. I did some research on the subject. In general, driving the process for doing this stuff. (3mm WC fastening plate.)

Now we want to coat 800 micron WC Co by HVOF system. Do you have engaged in work on the subject?


I think no real problem with Kerozene HVOF (JP5000 or Wokajet) or with HVAF, and probably difficult with bad results with other HVOF (ex DJ2xxx)
Reply
09-30-2010, 01:00 AM,
#3
RE: Cutting blades for paper industry
Gordon what do you think abaut this subject? I need some information about that Sad We have GTV Topgun HVOF , coating mat. ,Travers speed, thicknees ect i need some parameters.
Reply
09-30-2010, 03:47 AM,
#4
RE: Cutting blades for paper industry
(09-29-2010, 12:14 PM)Metallurgy_eng Wrote: Hi everyone.

We will couting blades for paper industry. I did some research on the subject. In general, driving the process for doing this stuff. (3mm WC fastening plate.)

Now we want to coat 800 micron WC Co by HVOF system. Do you have engaged in work on the subject?

You can try the ESD process.
Reply
10-04-2010, 08:52 AM,
#5
RE: Cutting blades for paper industry
Hi Metallurgy_eng

What type of paper cutting machines?

Quote:Now we want to coat 800 micron WC Co by HVOF system.
Why this thick? Is it purely to enable regrinding when worn? If not I would go much thinner.
Reply
10-05-2010, 07:13 AM,
#6
RE: Cutting blades for paper industry
probably difficult with bad results with other HVOF (ex DJ2xxx)

_____________________________________________________________________

Curious why you would think so, as unfortunately we have a DJ 27** in our lab.
Reply
10-05-2010, 12:28 PM,
#7
RE: Cutting blades for paper industry
We coated 750 micron WC Co on the blades with c2h2 TopGun. When we was ginding angle of 23 o the sharp of WC broken and spilled.
Normally glued to the back of the knife plate 3 mm WC. And Between finish tungsten becomes razor sharp. We would like to apply a coating technique different from bonding technique.

Thickness is more than necessary. Because when we do Grinding angle ,the blade needs to appear in the oral part of the layer.
Reply
10-18-2010, 09:45 PM,
#8
RE: Cutting blades for paper industry
Dear Metal_Eng
I'd like to share our experience with cutting knives for paper industry. I assume you are talking about Guillotine knive, not a circle one. The main problem there is that you need to keep a constant angle of the blade as long as possible to achieve the proper cutting of large number of sheets. That is why on common blades you find a strip of WC 2-3 mm thick, soldered to the steel base. Given that it is sharpened at an angle, it gives a working surface of WC 4-5 mm. I doubt that you can form a coating this thick that will be able to "hang" from the substrate. We did some tests sparying Tungsten Carbide 0,3 mm on knife, and run into the problem of loosing cutting anle much faster than the traditional knife. Although it created a "self-sharpening" effect, it lead to paper jamming due to incorrect angle.
We tried that on guillotine cutting machines at the printing factory. But at other applications coatings work very well. Hope this helps.
Reply
10-18-2010, 10:00 PM,
#9
RE: Cutting blades for paper industry
Hi Andy ,

Thanks for your help. I send u PM for talk about that subject.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Thermal Spray in Food industry yatuin 3 1,704 11-21-2019, 07:04 PM
Last Post: Vadim Verlotski
  Hardfacing shredder blades ?? RD.welding 1 1,917 06-26-2018, 08:07 AM
Last Post: velocity
  Gas Turbine Blades HVOF Coating masking demionkrishan 7 5,512 01-17-2018, 01:09 AM
Last Post: Taz
  opening blocked cooling holes in Stage 1 gas turbine blades Gustavo Woltmann 1 1,961 03-07-2017, 08:27 AM
Last Post: loriolo
  opening blocked cooling holes in Stage 1 gas turbine blades demionkrishan 1 2,150 03-04-2017, 07:44 AM
Last Post: loriolo
  turbine blades and vanes HVOF appliaction anne 4 3,271 12-02-2016, 05:54 PM
Last Post: demionkrishan
  roll in paper production Arturas 17 14,073 12-21-2009, 08:58 AM
Last Post: Stephen Booth
  Coating applied in paper pulp filter? Garyn 4 4,883 07-14-2009, 06:15 PM
Last Post: djewell



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd