Convert Diamond Jet from Propylene to Propane

[LEN WOOD]

Hello All,

We need to convert a Diamond Jet gun ‘air cooled’ hardware from Propylene to Propane. I know it’s not the greatest fuel but it must be done.

The current propylene hardware is as follows (left hand column):



The manual doesn’t have any parameters or spray tables for ‘air-cooled’ Propane spraying. I have Propane parameters but they list the DJ3-9 air cap or ‘DJ1050 HARDWARE’ configuration.

Maybe these “DJ3-9 air cap or ‘DJ1050 HARDWARE’ configurations” superseded the old (in table above)?

If anyone can assist or shed any light on this then it would be very much appreciated

Thanks

Len

[KevGarty]

Is the attached any use to you Len ?

Cheers

Kev

[LEN WOOD]

Hello Kev,

No, But but thanks anyway.

Cheers

Len