Conversion problem
11-30-2009, 10:03 AM,
#1
Conversion problem
Hello

I'm currently trying convert some flow plasma gas from Metco FMR to NLPM. I look in web site calculator, but I have a small problem, one of flow to translate is Nitrogen and flow is avaible for Helium secondary plasma gas flow tube! Can I use the Nitrogen primary plasma gas flow correction calculator for this translation?

Regards

Olivier
Reply
11-30-2009, 01:28 PM,
#2
RE: Conversion problem
(11-30-2009, 10:03 AM)landemarre Wrote: Hello

I'm currently trying convert some flow plasma gas from Metco FMR to NLPM. I look in web site calculator, but I have a small problem, one of flow to translate is Nitrogen and flow is avaible for Helium secondary plasma gas flow tube! Can I use the Nitrogen primary plasma gas flow correction calculator for this translation?

Regards

Olivier
I answer to myself.

I have seen in conversion formula, as primary gas and helium secondary gas are calibrated by nitrogen, use nitrogen converter should answer to my question.

Agree?

Olivier
Reply
12-01-2009, 05:12 PM,
#3
RE: Conversion problem
Hi Olivier

Yes Smile as long as the helium flow tube is calibrated the same (nitrogen at 50 psi @ 70F). If you pass nitrogen at 50 psi and 70F the helium flow meter should give a direct read-out in SCFH for nitrogen. Use Nitrogen Primary Plasma Gas Flow Calculator if using different pressures or different flow units.
Reply
12-02-2009, 10:58 AM,
#4
RE: Conversion problem
Hello Gordon

Thanks a lot for your help.

Olivier

(12-01-2009, 05:12 PM)Gordon Wrote: Hi Olivier

Yes Smile as long as the helium flow tube is calibrated the same (nitrogen at 50 psi @ 70F). If you pass nitrogen at 50 psi and 70F the helium flow meter should give a direct read-out in SCFH for nitrogen. Use Nitrogen Primary Plasma Gas Flow Calculator if using different pressures or different flow units.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
Cool Metco FMR unit conversion TintinMilou 5 13,765 07-13-2021, 04:33 PM
Last Post: J!m
  Coating hardness conversion bhellman 7 37,246 02-18-2020, 10:13 PM
Last Post: Neufeld
  conversion from lpg/propane to hydrogen rmsengineering 0 1,261 12-15-2019, 02:46 PM
Last Post: rmsengineering
Shy flow rate conversion of propane in DJ2700 guang 1 4,040 12-16-2012, 11:52 PM
Last Post: KevGarty
Information Conversion of APS to VPS rayudugirish 1 3,637 08-18-2009, 02:49 PM
Last Post: Gordon
  Hardness Conversion kc77 7 14,494 05-12-2009, 11:37 PM
Last Post: Gordon
  Hardness Testing Methods and Conversion Gordon 3 16,879 04-01-2009, 08:08 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd