Coating for cyclone internal surface
12-11-2018, 06:58 AM,
#1
Coating for cyclone internal surface
Hello,

It is necessary to coat internal surface of cyclone against erosive and abrasive wear. Max internal diameter 2800mm, length 4000mm. Working conditions are: temperature 350C, very intensive flow of fumes, dust, ashes. Abrasive particles size are in range 40-100mkm. Does any one have experience what type of material for such conditions to apply using wire arc spray system.

Arturas
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
Lightning WC10Co4Cr HVOF coating leaves some lumps on the surface tobjung 1 914 10-17-2023, 07:32 AM
Last Post: Vadim Verlotski
  surface speed for HVOF coating process gito 8 6,249 05-03-2019, 01:08 PM
Last Post: Lemster68
  Remove HVOF Coating in airfoil surface blade achmadarifudinh 5 4,322 07-20-2018, 10:51 AM
Last Post: achmadarifudinh
  Coating surface roughness William 9 27,616 12-26-2017, 10:40 AM
Last Post: Vadim Verlotski
  Powder Coating for Surface Table achmadarifudinh 3 4,095 11-28-2017, 12:19 PM
Last Post: Artyom
  Un-common surface pattern on coating failure shantanu 2 4,081 10-06-2016, 02:55 PM
Last Post: Vig
  Boron Carbide as a Surface Coating TCHP222 0 4,135 11-12-2015, 08:06 PM
Last Post: TCHP222
  Metco 450 coating surface problem Yaakov 2 7,109 05-06-2015, 01:54 PM
Last Post: loriolo
  HVOF coating over Induction Hardened surface shantanu 1 4,182 01-30-2015, 08:17 PM
Last Post: djewell
Lightbulb Ceramic Coating of Internal Diameters and Small Precision Parts Refmet 0 5,622 07-08-2014, 01:07 PM
Last Post: Refmet
  Surface contact stress limit over an HVOF coating HVoilF 1 5,475 05-22-2013, 02:07 PM
Last Post: djewell
  Surface Speeds and traverse for coating Cro-167 js2know 2 8,447 12-23-2011, 02:15 PM
Last Post: Gordon
  Surface prep issues before APS coating msiranni 6 8,041 06-21-2011, 12:56 PM
Last Post: Justin
  Inconel 625 coating on flange surface gops123 5 13,350 04-05-2011, 01:54 PM
Last Post: Stuart Milton
Shy Chromium Oxide Coating - Surface Finish Ra values Ian Mc 5 13,151 05-15-2009, 05:17 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd