Coating and Heat treatment Improvements
04-20-2017, 01:44 PM,
#1
Coating and Heat treatment Improvements
Hi to all fellows,
Can anyone help me to share knowledge about coating and Heat Treatment (Vacuum Furnaces) improvement?
I am expecting new ideas, to save Powder Cost, Material Cost and Gas fuel cost
Powder Management Software(any excel or VB databases)
Job handover development?
Machine and Man Utilization?
5s and Lean Six sigma projects ..

whatever it can help me to develop my cell in a higher level is appreciated..


Regards,
Demion Krishan Francis
Reply
04-21-2017, 03:11 PM,
#2
RE: Coating and Heat treatment Improvements
That is a rather comprehensive ask...

It sounds like you need to hire someone like me for a few months. Unfortunately I am not currently available.

That is basically a complete shop rebuild from the ground up. Changing culture in a spray room environment can be very difficult, where "that's the way we've always done it" prevails.

I've built up a few shops (working on one now) and starting from scratch is easier than trying to change. But, it can be done. It really depends on your operators more than anything else. They have to want to change. If they don't, it's a long hard road.
Spraying since '87. University of Metco alum (99-16)

Available for consultation services- please send a PM
Reply
04-22-2017, 06:13 AM,
#3
RE: Coating and Heat treatment Improvements
Thanks Jim for your comments, Please the others in team provide me your ideas too.
Regards,
Demion Krishan Francis

[/quote]

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Surface Treatment of Ceramic Coatings brkozdemir41 0 1,157 12-18-2020, 12:09 AM
Last Post: brkozdemir41
  heat treatment of MCrAlY coatings clover 4 6,868 06-26-2017, 12:55 PM
Last Post: Nesher
  Fusing and heat treatment sprayloud 3 2,219 06-24-2017, 12:30 PM
Last Post: Vadim Verlotski
  Heat treatment after HVOF process to decrease porosity Giroud 3 5,092 07-13-2015, 05:51 AM
Last Post: aerotherm
  Masking tape for high-heat ceramic coating. texnicar 1 3,265 04-21-2015, 04:09 PM
Last Post: cris1904
  Sprayed, welded or cast alloys for high heat Zanitech 2 3,291 10-01-2013, 09:08 PM
Last Post: Met.Eng.
  Chrome Carbide & T800 Coating Property Change after heat treatment Alexangel1226 5 13,549 09-30-2010, 03:04 AM
Last Post: arjfaye06
  surface treatment of Pistols sadaqat 3 4,691 01-09-2010, 05:37 PM
Last Post: Gordon
  Renew plasma after heat treatement TurbineRepair 3 5,967 10-14-2008, 09:52 AM
Last Post: Alexangel1226
  Heat Treatment of Abradable Coatings wasif 1 4,288 09-04-2007, 03:59 PM
Last Post: Gordon
  Preheating heat sources powerman 2 5,389 07-29-2007, 12:19 AM
Last Post: powerman



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd