Chrome Oxide Hardness
02-18-2020, 08:07 PM,
#1
Chrome Oxide Hardness
Hi all,
Im trying to find out how hard(HV vickers) it is possible to spray chrome oxide.
I use Amperit 707.054 (99.5% chrome oxide) Grain size -45/+10
Spraying with an F4 plasma gun

I am able to get up to 1250-1290 vickers.
Testing is done per ASTM E384-17

I have a customer that wants us to achieve 1300+ vickers. We are struggling to reach this spec.

Parameters used are:
Argon: 80 schf
Hydrogren: 15-18 scfh
Carrier Gas (Argon): 5.5 scfh
Powder volume: 35-40 g/min
Amps: 625
Volts: 67
Gun Standoff: 4"
Using air nozzles on gun to keep flame clean and focused.

Does anyone have experience achieving 99.5% chrome-oxide coating at 1300+ vickers with F4 Plasma gun?
Reply
02-18-2020, 09:25 PM,
#2
RE: Chrome Oxide Hardness
Have you seen this thread?

http://www.gordonengland.co.uk/sef/Threa...conversion

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Chrome Oxide Plasma SG-100 with N2 warx 0 2,799 10-30-2013, 05:54 PM
Last Post: warx
Information Chrome oxide thermal sprayed coatings shelf life Leanne 1 3,123 02-14-2013, 02:18 PM
Last Post: Gordon
Exclamation Cleaning Ceramic (Chrome oxide) coatings - as-sprayed Leanne 1 3,198 02-04-2013, 08:18 PM
Last Post: kschewe
  pencil hardness and tukon hardness test transit 6 16,391 10-04-2012, 02:15 PM
Last Post: bruisjem
  chrome oxide coating failure - 24" dia. steel roll rconnor 3 5,614 07-10-2012, 02:37 PM
Last Post: loriolo
  Aluminum oxide+titanium oxide schumi 11 11,564 04-19-2011, 11:15 PM
Last Post: loriolo
  Chrome Oxide Coating: Free Chrome rayudugirish 2 5,055 10-15-2009, 02:30 AM
Last Post: Gordon
  Tantalum based chrome oxide djewell 1 4,573 03-19-2009, 10:26 PM
Last Post: Gordon
  Chrome Oxide Coating Failure M Brecker 6 12,095 03-11-2009, 01:36 PM
Last Post: KevinT
  Chrome Carbide - Nickel Chrome or 95MXC in wire form for a Cylinder Liner? mcg_pinsbushing 0 6,480 05-07-2008, 10:00 AM
Last Post: mcg_pinsbushing
  plasma sprayed chrome oxide raviswanadha 1 5,838 04-02-2008, 03:35 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd