Ceramic and metal coating powders
09-19-2017, 04:11 PM,
#1
Ceramic and metal coating powders
Hi everyone !

I'm Lilian. I'm a final year student in a french business school.
I'm looking for some experts in thermal spraying/welding/coating powders for a project.
Thanks in advance if you take the time !

1. Are there any real substitutes/alternatives that could replace thermal spraying and welding in the years to come ? (is 3D printing a threat?)
2. If yes, would that be a threat for the powder market as well ?
3. I know some new powder suppliers are coming from Asia. Are they strong/competent enough to compete with suppliers such as HC Starck, Praxair or Oerlikon ?
4. There are a lot of prices for powders according to their composition. Yet, do you have some price ranges of the most commonly used ones ?

Thanks again. I hope I did not ask too many questions Wink

Reply
09-20-2017, 06:06 PM, (This post was last modified: 09-20-2017, 06:25 PM by Vadim Verlotski.)
#2
RE: Ceramic and metal coating powders
(09-19-2017, 04:11 PM)JeanRellier Wrote: Hi everyone !

I'm Lilian. I'm a final year student in a french business school.
I'm looking for some experts in thermal spraying/welding/coating powders for a project.
Thanks in advance if you take the time !

1. Are there any real substitutes/alternatives that could replace thermal spraying and welding in the years to come ? (is 3D printing a threat?)
2. If yes, would that be a threat for the powder market as well ?
3. I know some new powder suppliers are coming from Asia. Are they strong/competent enough to compete with suppliers such as HC Starck, Praxair or Oerlikon ?
4. There are a lot of prices for powders according to their composition. Yet, do you have some price ranges of the most commonly used ones ?

Thanks again. I hope I did not ask too many questions Wink

Hi Lilian,

I can not speak for all, but I will express my opinion. Maybe you get completely different answers:

1. 3D printing is not an alternative to welding or thermal spraying. Laser welding is an alternative that is growing strongly today, but this process will not replace "normal" welding or thermal spraying.
3. I am convinced that powder from Asia will dominate the market in a short time. Oerlikon, H.C. Starck and Praxair have no chances in the long run.
4. Common prices for nickel-based metallic powders are 40-60 $/kg (MCrAlY: 70-150 $/kg), copper base alloys: 15-30 $/kg and iron base: 5-20 $/kg. Prices for Cr3C2-NiCr powders: 50-80 $/kg, for WC-Co and WC-Co-Cr powders: 70-90 $/kg. Ceramics can vary greatly in price: from < 10 $/kg (Al2O3) to > 100 $/kg (YSZ, Y2O3 and other).

Regards
Vadim
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Hardness increase in Chrome Ceramic Plasma Coating DMan 6 1,527 03-25-2021, 01:24 PM
Last Post: DMan
  ceramic exhaust coating soplillorfr 1 1,501 12-06-2020, 01:04 AM
Last Post: Stephen Booth
  Ceramic Coating on Aluminum Base metal demionkrishan 9 3,071 02-03-2020, 09:35 AM
Last Post: DMan
  Info needed on Bond Strength for Thermal Spray powders hereticgame 1 2,462 10-10-2017, 11:39 AM
Last Post: Vadim Verlotski
  Masking tape for high-heat ceramic coating. texnicar 1 3,265 04-21-2015, 04:09 PM
Last Post: cris1904
  Metal Spray Coating for ID Fan Impeller RV_DMG 2 4,115 04-08-2015, 06:54 PM
Last Post: Met.Eng.
  suppliers in the uk for powders bazw 0 1,754 10-19-2014, 09:26 PM
Last Post: bazw
Lightbulb Ceramic Coating of Internal Diameters and Small Precision Parts Refmet 0 4,256 07-08-2014, 01:07 PM
Last Post: Refmet
  PTA Powders attin 0 2,378 01-31-2011, 07:45 PM
Last Post: attin
  Clogging problems with WC-Co Fine powders Met.Eng. 2 4,195 01-03-2011, 03:09 AM
Last Post: kschewe
Question obstruction during deposition of amorphous powders desMoira 6 6,060 07-22-2010, 01:18 PM
Last Post: desMoira
Question Duplex Ceramic Coating k09 2 3,971 03-31-2010, 05:15 AM
Last Post: k09
  ceramic coating rezabertoni 3 5,128 09-01-2009, 09:55 AM
Last Post: k09
  Hardfacing nickel based powders to AISI 431 Stainless Steel attin 10 13,691 04-28-2009, 02:26 PM
Last Post: djewell
  Ceramic flame powder coating result in Black colour iwan-sedaryawan 6 11,300 09-12-2008, 01:56 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd