Brush instead grit blasting
10-23-2011, 08:10 PM,
#1
Brush instead grit blasting
Dear Gordon

Simply, is it any possible to use wheel brush instead grit blasting to increase surface roughness. We have experienced that machine brushing gives very good adhesion , pretty much similar to grit blasting.

Regards,
Reply
10-27-2011, 02:49 PM,
#2
RE: Brush instead grit blasting
What roughness profile do you get with the brush?

Could you share details of the wheel brush?

Regards

K09
Reply
10-27-2011, 06:14 PM,
#3
RE: Brush instead grit blasting
(10-27-2011, 02:49 PM)k09 Wrote: What roughness profile do you get with the brush?

Could you share details of the wheel brush?

Regards

K09

We got an average roughness Ra=16 microns, by using tyrolit wheel brush which doesn't leave any impurities in workpiece when brushing. It is important to say that we use this procedure after preheating, and it's giving a good results. But on the other hand , we've seen that many of you first start grit blasting, and after 30min preheating and so on...

Our results seem to be very good, maybe a bit better if we found even better wheel brush

Regards
Reply
11-16-2011, 07:25 AM,
#4
RE: Brush instead grit blasting
Hi Divanis, we use and have customers that use the Equipment below:

(link dead)

It is possible to get an anchor profile up to 120 Microns

If you need any info on it just give me a shout, I think most of the information is on the company website.

Cheers
Reply
11-16-2011, 05:32 PM,
#5
RE: Brush instead grit blasting
It looks interesting, for sure we're going to take a look on it. Many thaks for info.
Cheers,
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Dimension change after grit blasting TomasCro 7 10,662 07-10-2023, 07:08 AM
Last Post: anilsingh012
  Grit Blasting Parameters DanyGans 3 6,764 08-20-2018, 04:04 PM
Last Post: darexpl
  Grit blasting epoxy, carbon fibre and titanium in one cabinet? David Churcher 2 5,515 11-30-2012, 01:42 PM
Last Post: MichiganMan
  Surface roughness after grit blasting Leanne 8 26,858 08-15-2012, 05:28 AM
Last Post: Leanne
  Build Up without grit blasting Met.Eng. 5 7,757 09-27-2011, 03:57 AM
Last Post: kschewe
  Dirt in the grit blasting machine Aware 7 9,576 05-20-2011, 05:27 PM
Last Post: Aware
  Grit Blasting Riz 5 14,632 05-10-2011, 01:14 PM
Last Post: MichiganMan
  Removal of grit after grit-blasting? pulaunias 11 23,244 06-18-2010, 01:52 AM
Last Post: Gordon
  grit Blasting 13cr steel hibberd 3 6,719 04-14-2010, 07:51 PM
Last Post: Gordon
  Increase production rate of Grit Blasting of steel plates Adarsh 4 10,128 07-14-2009, 07:47 PM
Last Post: djewell
  Grit Blasting Titanium rbeale98 3 12,082 04-13-2009, 08:52 PM
Last Post: Gordon
  Alternatives to grit blasting? durkie 8 13,770 03-19-2009, 10:47 PM
Last Post: Gordon
  Grit Blasting Airline 16 31,317 11-18-2008, 06:43 PM
Last Post: Steph
  Grit Blasting noise reduction TheZard 4 13,074 03-01-2007, 10:36 AM
Last Post: Alexangel1226



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd