Bond coat
11-09-2007, 05:24 PM,
#1
Bond coat
Hi Gordon , i want to know what is the best bond coat that is to be used for spraying (Cr2O3,5SiO2,3TiO2) on graphite.
Reply
11-09-2007, 07:02 PM,
#2
RE: Bond coat
Hi Raviswanadha

I can only suggest some experimentation. Try without bond coat, traditional bond coats NiAl and molybdenum. Tungsten is claimed to bond to graphite. Perhaps you could give us more details on substrate, application etc.
Reply
11-20-2007, 07:18 AM,
#3
RE: Bond coat
Hi,
As suggested by Gordon try with conventional bond coat or without any bond coat.
If you do not get the coating adherence then try following:-
*deposit a thin layer of electroplated Ni or Al or Ni+Al by brush plating and then have your ceramic coating
ram chattopadhyay
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Recomended bond coat for Metco 81 VFNS top coat achmadarifudinh 9 4,717 07-06-2023, 04:54 PM
Last Post: ServiceTech
  Metallic HVOF bond coat to TBC APS top coat Gas turbines achmadarifudinh 0 1,839 07-08-2019, 08:34 AM
Last Post: achmadarifudinh
  Bond coat for Metco 312NS Bharti Malvi 4 5,058 12-21-2016, 08:51 AM
Last Post: Bharti Malvi
  How do I do Bond Coat Selection? RV_DMG 2 4,686 03-13-2015, 11:44 PM
Last Post: loriolo
  Delamination in the bond coat sprayed on a Ti specimen Justin 9 10,209 01-06-2014, 10:00 PM
Last Post: KevinS
  I need advise on control of metco 405 bond coat Amoros 4 7,122 12-01-2011, 02:08 PM
Last Post: EmilyWatson
  Oxide anomalies in bond coat JBross 5 7,510 11-28-2011, 06:16 PM
Last Post: JBross
Shocked Cracks! in bond coat Christine 5 8,309 11-28-2011, 11:26 AM
Last Post: landemarre
  Possibility Study to use Stellite - 306 Bond Coat for 75Cr3C2 -25NiCr Top Coat -Reg sreenuvundela 2 5,941 09-14-2011, 05:36 AM
Last Post: sreenuvundela
  F50TF50 bond coat Harvey 6 9,802 07-10-2009, 07:01 PM
Last Post: derek
Sad Dark grey particles in Ni-Al bond coat? fhyuan 9 12,286 01-18-2009, 07:02 PM
Last Post: Gordon
  oxide stringers in the bond coat fhyuan 5 11,255 03-18-2008, 04:40 PM
Last Post: Jerrythespritzer



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd