BOILER TUBE COATING
07-30-2006, 04:42 PM,
#1
BOILER TUBE COATING
We are carrying out Boiler Tube Coating by TAFA ARC SPRAY PROCESS. We have TAFA 8030 ARC SPRAY system. These coatings are currently being done in Running units during ANNUAL shutdown in S.- BENDS & ECONOMISER region.

We would like to know if we can carry out coating on New Boiler tubes and if so how does ARC SPRAY COMPARE TO HVOF as far life expectancy is compared. We are currently using BONDARC75B & TAFA 95MXC wires.

WHAT is the life expectancy of Coated & uncoated Tubes respectively.

Will appreciate if anybody has relevant experience on the matter to give us an opinion.

Thanks
Reply
07-31-2006, 06:09 PM,
#2
RE: BOILER TUBE COATING
Hi Ehasan

Welcome to the Surface Engineering Forum.

May be a little out of touch with this industry, but back in the 90s the old UK CEGB rated plasma spray 50/50 Ni/Cr coatings (no bond coat). HVOF versions of this coating I think would be superior. Obviously the environment next to the coating will be a critical factor, so there is probably not going to be one ideal coating for all situations. Again, estimating life expectancy will be difficult for the same reasons.

Below is a link to an interesting article. I'm not suggesting it as a recommendation, as I have no experience with the product and don't know how much sales hype is being used. You will find it interesting because it is arc spray applied and has comparisons to 95MXC and 625.

Sorry, these links seem to be dead now. Sad
Links deleted.
Reply
08-01-2006, 04:39 AM,
#3
RE: BOILER TUBE COATING
Thanks for the reply and the link to the othersite. Problem is every body has tall claims and no proper assessment from 3rd party. In any case it was a good lead.
Reply
11-26-2006, 07:51 AM,
#4
RE: BOILER TUBE COATING
As a group, we have had lot of expriences on boiler tube coating in India and in Europe in 90'ies.As Gordon has rightly pointed out, type of coating materials to be used depends on interacting?environment. For??high ash Indian coal,use high hardness coat to minimize erosion wheras high sulphur Waste heat boiler tubes need corrosion resistant coatings.European coal requires Ni-Cr.In-situ coating operation is much more difficult than OEM
For boiler tube application details, check with my book on 'Advanced Thermally Assisted Surface Engineering Processes',Kluwer Academic Publishings,MA,USA,2004
Ram
Reply
11-14-2017, 03:24 AM,
#5
RE: BOILER TUBE COATING
Just following up on an old post, but probably some will still benefit from this latest information on "spray on ceramic coatings" from Fireside Coatings USA.


XP 61 is an advanced high emissivity, thin film, spray applied ceramic coating specifically formulated to provide protection of both carbon and stainless steel boiler tubing.

The coating is a high solids system which can be applied to a dry film thickness of 12 to 20 mils (300 to 500 microns) and has no VOC (Volatile Organic Compound) content.

XP61 can be formulated to address specific application needs such as corrosion and erosion resistance, slagging and fouling mitigation and specific thermal management requirements.

XP 61 bonds well to properly prepared carbon steel or stainless steel substrates.
Working properties of the coating exhibit an extended shelf life prior to exposure to air.

Upon curing XP 61 becomes a durable ceramic coating that will provide protection to boiler and furnace tubing and other steel substrates to 1,600° F (871° C) and will withstand thermal cyclic conditions to 1,800° F (982° C)

XP 61 may also be applied as a thermal spray sealer to prevent coating permeation in high temperature environments.


https://firesidecoatings.com/ceramic-coatings/xp-61/
Stephen James Booth
www.ipsteknokraft.com
www.teknokraft.com
Indonesia WhatsApp +6281905603262

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Spray & Fuse coating for Boiler tubes Jaydev 8 7,855 05-10-2020, 08:14 PM
Last Post: SENTESBIR-POWDERS
  Boiler tube failure Flo24 8 13,641 06-22-2019, 01:19 PM
Last Post: velocity
  coating Fluidized Bed Combustion Boiler tubes iwan-sedaryawan 9 7,679 09-18-2017, 05:01 AM
Last Post: Stephen Booth
  Coating on Boiler tube in Coal Fired Power Plan by using Tafa wire 97MXC Iwan Sedaryawan CA 4 3,899 04-21-2017, 03:17 PM
Last Post: J!m
  JP5000 combustion tube KevGarty 5 4,883 11-01-2013, 09:19 PM
Last Post: kschewe
  Coating of coal Boiler tube wall iwan-sedaryawan 6 7,492 05-10-2011, 07:16 AM
Last Post: A.Termika Ltd
  Refuse Incineration (Waste to energy) Boiler Coatings MichiganMan 4 6,723 09-26-2010, 05:48 AM
Last Post: Stephen Booth
  Erosion-corrosion issues in boiler applications sivakumar 1 5,169 05-04-2010, 08:40 PM
Last Post: MichiganMan
Rolleyes Boiler Tube Puncture amitpagare 2 6,579 04-27-2008, 06:40 AM
Last Post: drramc
  BOILER TUBE COATINGS Vijay Deshpande 3 6,825 02-15-2008, 08:42 PM
Last Post: jeffsays163



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd