Arc Wire Spraying Bond Strength
11-30-2014, 02:09 PM, (This post was last modified: 11-30-2014, 02:14 PM by wtaz.)
Arc Wire Spraying Bond Strength
I would like to rebuild a bearing journal 4inches diameter using the Arc Spraying. However I don't have the Bond wire instead I have the Eutectic Xuperbond powder that I use in powder flame spraying. The powder has the same alloy composition as the Bond wire . My question is , is it possible to use the Xuperbond powder then use 13% chrome wire for the top coat. Will the Bond be strong enough?
Could the experts on the forum please help.
Thanks Cool
12-02-2014, 09:38 PM,
RE: Arc Wire Spraying Bond Strength
My opinion/preference - I wouldn't use the flame then arc spray. As the 2 coatings will have different chemical strengths.

Depending on the application the bond strength of the stainless alone would probably be fine. Bond coat arc spray would have a bond strength of around 9000 psi, stainless may be around 6000 psi ? (dont quote me on those figures) so its still relatively high. As long as the coating isnt too thick i.e +0.030" then it would be fine if its just a straight forward bearing journal as there is no form of abrasion or significant wear on the coating. As long as you have a good blast profile then it should be fine.

As I said the above is my personal opinion/preference other people on the sight may have a different opinion
12-03-2014, 06:24 AM,
RE: Arc Wire Spraying Bond Strength
I would not recommend you flame spray for bond coat & finally arc spray for top coat. For bearing journals I think best option is Wire arc spray for both bond coat & top coat. Trying some other ways will be development work.


12-03-2014, 11:53 PM,
RE: Arc Wire Spraying Bond Strength
Hi wtaz,

Arc Spray Max Bond Coat : 9700 Psi
Powder Flame Spray Bond Coat : 6000-7000 Psi
ArcSprayed 13Cr Steel bonding :4000 Psi

12-04-2014, 12:02 AM,
RE: Arc Wire Spraying Bond Strength
(12-03-2014, 11:53 PM)Met.Eng. Wrote: Hi wtaz,

Arc Spray Max Bond Coat : 9700 Psi
Powder Flame Spray Bond Coat : 6000-7000 Psi
ArcSprayed 13Cr Steel bonding :4000 Psi

Thanks very much for the info I'm slowly grasping the idea however is it possible is it ok to powder flame spray the Bond coat then arc spray the top coat will the final Arc spray finish bond with the powder bond coat ?

Possibly Related Threads…
Thread Author Replies Views Last Post
  Info needed on Bond Strength for Thermal Spray powders hereticgame 1 2,454 10-10-2017, 11:39 AM
Last Post: Vadim Verlotski
  Mo wire spraying Arturas 6 3,037 09-15-2017, 01:29 PM
Last Post: Arturas
  95Ni 5Al bond strength alaskangrown 1 2,909 01-15-2016, 05:09 PM
Last Post: loriolo
  Arc wire Bond wtaz 1 2,912 06-29-2015, 09:47 PM
Last Post: loriolo
  Wire Flame spray and Twin Arc spraying wtaz 1 3,290 03-30-2015, 09:41 PM
Last Post: loriolo
  HVOF T800 Tensile Bond Strength issue wgg237 2 4,561 03-05-2015, 01:52 AM
Last Post: wgg237
Shocked Hard Crome Plating Bond strength Met.Eng. 4 6,331 02-24-2015, 02:37 AM
Last Post: Simon Kim
  MIG WIRE FOR TWIN WIRE ARC SPRAYING wellish 1 3,750 11-14-2014, 07:39 PM
Last Post: Met.Eng.
  Abradable Coating-Bond Strength rayudugirish 9 12,616 01-06-2014, 09:55 PM
Last Post: derek
  Question on bond strength. Ghostwheel 4 5,082 10-13-2012, 10:03 AM
Last Post: kschewe
  Suggest on coating bond strength tester feifei0609 3 4,731 08-14-2012, 03:10 PM
Last Post: feifei0609
  Surface preparation and its effect on fatigue life and bond strength WMW 4 7,655 06-29-2010, 08:41 AM
Last Post: drramc
  95/5 Bond Strength George Brown 1 3,687 06-02-2010, 09:33 AM
Last Post: Gordon
  Bonding for Combustion/Flame Wire Spraying iwan-sedaryawan 3 6,486 02-10-2009, 04:59 PM
Last Post: iwan-sedaryawan
  twin wire arc spraying equipment for stainless steel wire, monel wire, etc. technovel 6 11,411 08-01-2008, 11:59 AM
Last Post: adam wintle

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd