Applications of Chrome Plating
05-14-2013, 01:03 PM, (This post was last modified: 05-14-2013, 01:06 PM by ritesh.)
#1
Applications of Chrome Plating
Hi frens,

I understand that hard chrome plating is used to repair worn-out steel rolls, in the cold-rolled steel mills.
Is chrome plating also done to texture the roll surface?

Any comments/opinionQuestion
Reply
05-14-2013, 06:07 PM,
#2
RE: Applications of Chrome Plating
Hello,
I think nowadays the whole system is working against application of hard chrome plating Smile At least in Europe
Reply
05-15-2013, 06:45 AM,
#3
RE: Applications of Chrome Plating
(05-14-2013, 06:07 PM)Arkzik Wrote: Hello,
I think nowadays the whole system is working against application of hard chrome plating Smile At least in Europe

Thanks for the reply Arkzik.

Even i came across articles which talk of banning Chrome plating in the EU. Has this actually been enforced by the coating companies (because i checked quiet a number of European companies, which still proudly mention chrome coating on their websites) Exclamation

What alternative materials are being used in place of Chrome in that case?..any takes Question
Reply
05-22-2013, 02:15 PM,
#4
RE: Applications of Chrome Plating
There are lots of chrome alternative coatings. Tungsten carbide is probably the most common, but there are many other candidates, depending on the properties you want to achieve. Chrome plating will not add texture to the surface of a part. It follows the contours of the part. Thermally sprayed coatings will have some surface roughness which can be enhanced or removed by secondary operations.
Reply
05-29-2013, 09:01 AM,
#5
RE: Applications of Chrome Plating
(05-22-2013, 02:15 PM)djewell Wrote: There are lots of chrome alternative coatings. Tungsten carbide is probably the most common, but there are many other candidates, depending on the properties you want to achieve. Chrome plating will not add texture to the surface of a part. It follows the contours of the part. Thermally sprayed coatings will have some surface roughness which can be enhanced or removed by secondary operations.

Thanks for this information djewell. Even i believed hard chrome plating to be a reapir mechanism, rather than one for texturing.


I wanted to understand, which would be the leading companies in the UK that provide repair and texturing services for steel mill rolls?

One such company that i am aware of is Texturing Technology UK....any idea of some others???
Reply
05-29-2013, 09:17 AM,
#6
Plasma coating 45VFNS
Hi Gordon,
We have currently an application of the following:
450NS as a bond thickness 0.10 to 0.15mm
45VFNS total thickness of 0.21 to 0.29mm
Base metal is stainless steel thickness 0.8mm
Such part is used as a air force jet adjustable exhaust flaps.

Could you please confirm whether 45VFNS (which is also used as a bond) could be applied with no primary 450NS bond coating?

It appears that our powder regulator went down and both powder selection went wrong, therefore 45VFNS only has been applied.
Final thickness of 45VFNS is of 0.30mm.

Could you also confirm traction and abrasion values if known?

Thanks for your kind help
Laurent
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Favourite and challanging spraying applications velocity 3 3,039 04-30-2019, 10:26 AM
Last Post: Stephen Booth
Shocked Hard Crome Plating Bond strength Met.Eng. 4 8,362 02-24-2015, 02:37 AM
Last Post: Simon Kim
  coatings WC-Co - applications in my case? pashamt8 5 6,926 05-07-2012, 02:49 PM
Last Post: saintGeorge
  Chrome plating replacement Andy_UK 10 11,808 08-31-2011, 06:40 PM
Last Post: JJStick
  remove chrome plating Jaydev 5 9,023 06-10-2011, 02:05 PM
Last Post: Manish Choudhary
  Open grain chrome plating z3braman 3 8,149 08-25-2010, 12:28 AM
Last Post: Gordon
  Erosion-corrosion issues in boiler applications sivakumar 1 6,738 05-04-2010, 08:40 PM
Last Post: MichiganMan
  Chrome Oxide Coating: Free Chrome rayudugirish 2 6,688 10-15-2009, 02:30 AM
Last Post: Gordon
  Marine Coating Applications istech 2 7,174 11-20-2008, 04:17 PM
Last Post: drramc
  Chrome plating guru2707 1 5,748 07-29-2008, 06:36 PM
Last Post: JAKDL
  Chrome Carbide - Nickel Chrome or 95MXC in wire form for a Cylinder Liner? mcg_pinsbushing 0 7,826 05-07-2008, 10:00 AM
Last Post: mcg_pinsbushing



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd