Amdry 9951. Anyone know the maximum coating thickness
01-28-2021, 10:12 PM,
#1
Amdry 9951. Anyone know the maximum coating thickness
Amdry 9951.
Anyone know the maximum coating recomended thickness
Reply
01-29-2021, 07:17 AM, (This post was last modified: 01-29-2021, 07:19 AM by Vadim Verlotski.)
#2
RE: Amdry 9951. Anyone know the maximum coating thickness
Usually the MCrAlY coating is sprayed no thicker than 200 microns (VPS). For safe operation as a bond coat, 100-150 micrometers is sufficient if the layer is of high quality (VPS + vacuum annealing). If the layer is sprayed using HVOF and not used as a bond coat but as an anti-oxidation layer, coating thicknesses over 200 micrometers make sense.
Reply
01-29-2021, 08:17 AM,
#3
RE: Amdry 9951. Anyone know the maximum coating thickness
Hi AntCarroll
Coating thickness of Amdry 9951 could appropriate for the thermal spray process being used (usually this material is used as bond coating), I can suppose that you use an HVOF process, and if it’s an O2/kerosene system the maximum coating thickness could be about 0,4 mm, if you use a HVOF O2/gas, as this coating have too much stresses, the thickness could be lower, and as this material is not sensitive to variations in substrate temperature, more care should be taken to ensure substrate temperature remains constant during the coating process the substrate temperature should be appropriate to the thermal spray process being used
Best regards
Luigi
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Coating Thickness Measurement Equipment Taz 2 1,840 08-04-2021, 04:59 PM
Last Post: ulises
  Starting parameters for Amdry 718 Cl.B edrazee 2 1,351 03-31-2020, 07:09 PM
Last Post: loriolo
  WC-CO-CR hvof coating thickness measurement on Base SS 316L JRB VIRANI 3 1,745 06-20-2019, 09:16 AM
Last Post: loriolo
  Amdry 9954 for titanium based alloy Bharti Malvi 6 4,152 12-21-2016, 07:39 PM
Last Post: Bharti Malvi
  Amdry 962 and Metco 204 NS parameters F1 45° giuiori75 2 7,130 03-24-2016, 04:31 PM
Last Post: Max K
  Abradable Coating Thickness limitation wasif 1 3,108 07-28-2015, 10:57 PM
Last Post: Johnny_Blaze
Shy TBS for Metco 450NS and AMDRY 2010 alvliew 3 3,782 06-14-2015, 10:59 PM
Last Post: Johnny_Blaze
  The thickness of coating minh_8888 5 5,578 03-25-2015, 10:31 AM
Last Post: Dr.Boris A.Eizner
  AMDRY 1718- Hardness alvliew 4 6,664 03-13-2015, 11:21 PM
Last Post: loriolo
  Drum Thickness Coating Requirement for SS316. samshah 0 2,199 11-13-2014, 04:56 PM
Last Post: samshah
  Maximum allowed RPM shantanu 10 6,167 11-29-2013, 04:30 PM
Last Post: Vijay Deshpande
  coating thickness Brent 7 6,375 03-09-2013, 11:56 AM
Last Post: sreenuvundela
  uneven Wc coating thickness Brent 5 5,609 01-20-2012, 04:13 AM
Last Post: KevGarty
  COATING THICKNESS GAUGE ehasan 3 5,085 01-14-2011, 08:07 PM
Last Post: Gordon
Cool Instrument to check coating thickness of Thermal Barrier Coatings odski0317 5 16,152 12-01-2010, 10:09 AM
Last Post: dienngothe



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd