Amdry 962 sprayed on labyrinth by F4 gun
06-07-2024, 09:22 AM,
#1
Amdry 962 sprayed on labyrinth by F4 gun
Hi All,

Does anyone have the experience about Amdry 962 sprayed on labyrinth by F4 gun?

Now what I'm facing is the flection of the powder, which leads to lots of unmelted particles and high porosity in coating. The parameters are Current 650A Argon 40NLPM H2 12NLPM 150mm 40g/min.
Reply
06-07-2024, 01:06 PM,
#2
RE: Amdry 962 sprayed on labyrinth by F4 gun
Sorry I can't help you much more than to suggest that you also tell us what nozzle and injector you are using.
Reply
06-10-2024, 06:04 AM,
#3
RE: Amdry 962 sprayed on labyrinth by F4 gun
What is the carrier gas flowrate for powder?
Increase in primary gas flowrate may help you.
Reply
06-13-2024, 07:00 AM,
#4
RE: Amdry 962 sprayed on labyrinth by F4 gun
(06-07-2024, 01:06 PM)Lemster68 Wrote: Sorry I can't help you much more than to suggest that you also tell us what nozzle and injector you are using.

The nozzle diameter is 6mm, and injector is 1.8mm with carrieer gas 2.5NLPM
Reply
06-13-2024, 07:02 AM,
#5
RE: Amdry 962 sprayed on labyrinth by F4 gun
(06-10-2024, 06:04 AM)ArjunAnnam Wrote: What is the carrier gas flowrate for powder?
Increase in primary gas flowrate may help you.

the carrier gas flowrate is 2.5NLPM
Reply
07-01-2024, 01:01 PM,
#6
RE: Amdry 962 sprayed on labyrinth by F4 gun
Zhao, I Think for the particular APS coating your requirement of porosity will be below 10% , if I am not wrong. I think you need to increase the heat input. try with below parameters also share your parameters, I can look and help you to optimize your parameters.

Nozzle 6mm
Powder injector 1.8mm
Primary Ar 45Nl/min / 100Scfh
Secondary H2 10Nl/min / 23Scfh
Carrier Ar 2.7 Nl/min / 5.7 Scfh
Amperage 560A
Voltage 62-63A
Powder Feed rate 45g/min
Spray distance 130-150 mm
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Amdry 956 Hardness Benjamin101 3 1,954 04-11-2023, 04:42 PM
Last Post: paikhuan
  3MBTD Amdry 995C parameters Max K 0 1,136 10-04-2022, 08:38 PM
Last Post: Max K
  Amdry 9951. Anyone know the maximum coating thickness Antcarroll 2 2,602 01-29-2021, 08:17 AM
Last Post: loriolo
  Starting parameters for Amdry 718 Cl.B edrazee 2 3,183 03-31-2020, 07:09 PM
Last Post: loriolo
  Amdry 9954 for titanium based alloy Bharti Malvi 6 6,564 12-21-2016, 07:39 PM
Last Post: Bharti Malvi
  Amdry 962 and Metco 204 NS parameters F1 45° giuiori75 2 11,657 03-24-2016, 04:31 PM
Last Post: Max K
Shy TBS for Metco 450NS and AMDRY 2010 alvliew 3 5,725 06-14-2015, 10:59 PM
Last Post: Johnny_Blaze
  AMDRY 1718- Hardness alvliew 4 8,804 03-13-2015, 11:21 PM
Last Post: loriolo
  AMDRY 500F AYKAC 1 5,440 03-01-2010, 12:26 PM
Last Post: Gordon
  Amdry 2010 & Metco 601 ykang 2 8,134 06-17-2008, 06:38 AM
Last Post: ykang



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd