Aluminium coating
01-27-2008, 03:24 PM,
#1
Aluminium coating
Hi,

Please help me!
I have to obtain on Aluminium coating on a 10 m long and 3 m diameter tank (carbon steel),
The thickness of the coating must be >0,12 mm.
Is it allowed to blast with quartz sand bebore spraying ?
Till now I never sprayed so big areas.
Do you know which could be the price for such a tank?
Thank you !
Reply
01-27-2008, 07:28 PM,
#2
RE: Aluminium coating
Hi exnnerspray

I would only recommend using alumina or chilled iron grit for final blasting before spraying. By all means use the cheaper blasting abrasives for initial cleaning of the surface before final grit blasting. The key to a good coating is in the substrate preparation, so take care when considering cheaper blasting materials.
Reply
01-28-2008, 11:19 AM,
#3
RE: Aluminium coating
Hi exnnerspray,
While carrying out Aluminium spray coating inside the vessle be sure about Fume and aluminium dust removal as some times aluminium dust becomes self explosive.
Wish you a best opf luck
Vijay Deshpande
Reply
01-28-2008, 04:57 PM,
#4
RE: Aluminium coating
Thank you

Gordon Wrote:Hi exnnerspray

I would only recommend using alumina or chilled iron grit for final blasting before spraying. By all means use the cheaper blasting abrasives for initial cleaning of the surface before final grit blasting. The key to a good coating is in the substrate preparation, so take care when considering cheaper blasting materials.
Reply
01-28-2008, 04:59 PM,
#5
RE: Aluminium coating
Thank yoy

vijaydeshin Wrote:Hi exnnerspray,
While carrying out Aluminium spray coating inside the vessle be sure about Fume and aluminium dust removal as some times aluminium dust becomes self explosive.
Wish you a best opf luck
Vijay Deshpande
Reply
05-06-2009, 04:42 PM,
#6
RE: Aluminium coating
Hi Laurent

Your post, I think is best as a new thread, as it is a little off topic here. I have create a new thread for you "Difference between Metco 450ns and Metco 8400?"

(05-06-2009, 10:05 AM)Laurent Wrote: Hello,
According to documentation available on web sites Metco 450NS and Metco 8400 are equivalent.
Metco 8400 is arc wire though.

Is there a difference between Metco 450NS and Metco 8400, used as a bond Ni 5Al?
If yes, could you please confirm?

Thanks for your help

Cheers
Laurent
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Looking suggestion for S2B "Z" notch coating & dove tail ARC spray aluminium coating demionkrishan 1 1,842 02-22-2022, 12:12 PM
Last Post: Artyom
  Surface Preparation of Aluminium acidic 2 5,192 05-09-2015, 01:59 PM
Last Post: CHI3
  Machining aluminium bronze hvof coating Orion 2 7,152 08-23-2012, 12:22 PM
Last Post: Orion
  Cr3C2 Ni-Cr coating on Aluminium ehsan 4 7,128 10-19-2011, 12:50 PM
Last Post: ehsan
  coating aluminium composite panel nicubila 2 9,394 12-13-2010, 08:14 AM
Last Post: Fydor75
  Thermoconductive super-hydrophobic coating of Aluminium cyphyus 8 12,233 08-03-2010, 06:43 PM
Last Post: cyphyus
  Coating freak Off From Aluminium Eagleman 5 7,462 04-25-2010, 02:29 PM
Last Post: Gordon
  Aluminium properties Yukawa 4 11,440 11-10-2009, 12:19 PM
Last Post: Yukawa
  aluminium coating 123raoel 3 6,616 04-21-2009, 12:47 PM
Last Post: Gordon
  Coatings for aluminium bshah 4 7,897 11-17-2008, 07:06 PM
Last Post: Gordon
  Spraying Pure Aluminium J_rock 1 5,759 08-05-2008, 02:51 PM
Last Post: Gordon
  Delamination of Aluminium Polyester Coating fhyuan 1 9,646 01-27-2008, 08:19 PM
Last Post: Gordon
  Problems with aluminium-silicon coating gasper 6 16,786 05-10-2007, 03:01 PM
Last Post: gasper



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd