Al2O3-TiO2 on Wccocr
08-09-2016, 07:41 AM,
#1
Al2O3-TiO2 on Wccocr
Anyone has experience with bond strength of Al2O3-TiO2 on a Wccocr (Ra 4.0)?
Reply
09-21-2016, 03:56 AM,
#2
RE: Al2O3-TiO2 on Wccocr
test done result is 18-25Mpa
Reply
09-21-2016, 08:52 PM,
#3
RE: Al2O3-TiO2 on Wccocr
Thank you, Joris!
What was the hardness for WCCoCr and which torch have you used to apply Al2O3-TiO2?

Regards.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  HVOF WcCoCr Sealant SSC 13 9,250 09-07-2020, 10:29 PM
Last Post: loriolo
  Surface prep. with Garnet instead of Al2O3 velocity 1 787 05-14-2019, 04:44 PM
Last Post: Lemster68
  High porosity in WcCoCr demionkrishan 4 1,645 02-24-2019, 06:16 PM
Last Post: loriolo
Lightbulb HVAF vs. HVOF WCCoCr Vig 19 7,707 06-05-2017, 12:05 PM
Last Post: Vig
  Craking problem in Al2O3+ TiO2 plasma coating Hector Monjardin 4 2,791 09-22-2016, 01:33 PM
Last Post: Hector Monjardin
  coating of Al2O3-TiO2 by HVOF mlavar 7 6,077 02-05-2014, 02:50 AM
Last Post: Stephen Booth
  HVOF WCCoCr Coating defect Patrick K 5 6,656 05-25-2012, 10:08 PM
Last Post: pakalano
  WCCOCR coating with plasma srihan_1 2 3,738 03-12-2012, 11:15 PM
Last Post: loriolo
Question Tantalum and WcCoCr coatings TintinMilou 7 9,963 09-13-2007, 12:53 AM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd