Al-Bronze Coating
01-25-2010, 07:59 PM,
Al-Bronze Coating
Anyone had an experience of spray Al-Bronze powder with Gas HVOF please give me more info about best parameters...
02-04-2010, 04:59 PM,
RE: Al-Bronze Coating
Hi Ehsan

Sprayed a little aluminium bronze (Diamalloy 1004) through Diamond jet guns. Did not feel the need to stray away from using the recommended parameters in process manuals/material data sheets.

Really you do need to give us more information to enable us to answer your question - specific equipment/gun, process gases and specific powder along with any special coating characteristics that you are after.
02-04-2010, 07:47 PM,
RE: Al-Bronze Coating
Hi Gordon
Our gun is HP2700 cng gas,generally our parameters is 8bar cng and 10 bar oxygen.powder size is 5-60 micron(wide range!!!).
part material is Aluminum.we have very thin thickness in this part.
02-06-2010, 04:31 AM,
RE: Al-Bronze Coating
Hi Ehsan

Sorry, no real experience with your equipment or powder. I can only suggest that you use the OEM's recommended parameters for the closest/most similar product as a starting point/base line for development.

Possibly Related Threads…
Thread Author Replies Views Last Post
  HVOF coating on bronze bearing housing demionkrishan 4 1,720 01-16-2020, 09:43 AM
Last Post: demionkrishan
  Bronze + AP Sealer KevGarty 1 3,465 10-07-2014, 10:00 PM
Last Post: loriolo
  porosity in bronze wire spray KevGarty 1 3,195 07-22-2014, 01:45 AM
Last Post: shantanu
  Machining aluminium bronze hvof coating Orion 2 5,891 08-23-2012, 12:22 PM
Last Post: Orion
  bronze powder coating attin 11 12,510 03-02-2011, 09:42 PM
Last Post: derek
  Machining for Aluminum Bronze wire flame spray iwan-sedaryawan 3 6,928 01-12-2011, 11:47 AM
Last Post: iwan-sedaryawan
  2micron WC coating on thin P-bronze disc drramc 5 6,293 07-23-2008, 01:28 PM
Last Post: Gordon

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd