AMDRY 500F
02-08-2010, 10:59 AM,
#1
AMDRY 500F
Hi Gordon and everyone,

I have interphase problems in spraying AMDRY 500F to Ti substrate. I have tried different grit blasting parameters to enhance surface properties and spray parameters to accelerate the splats to have better adhesion. Still the interphase has some oxide stringers and delamination. Can you please advise?

9MB Gun
732 nozzle
process gass: Ar/H2
Coating material: Cu-Ni-In (Fine)
Reply
03-01-2010, 12:26 PM,
#2
RE: AMDRY 500F
Hi AYKAC

These threads may be worth reading:

interface-separation-in-copper-nickel-indium-coating

interface-oxide

sand-blasting-on-titanium-substrate
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Amdry 956 Hardness Benjamin101 0 109 05-09-2022, 04:14 PM
Last Post: Benjamin101
  Amdry 9951. Anyone know the maximum coating thickness Antcarroll 2 1,399 01-29-2021, 08:17 AM
Last Post: loriolo
  Starting parameters for Amdry 718 Cl.B edrazee 2 1,774 03-31-2020, 07:09 PM
Last Post: loriolo
  Amdry 9954 for titanium based alloy Bharti Malvi 6 4,769 12-21-2016, 07:39 PM
Last Post: Bharti Malvi
  Amdry 962 and Metco 204 NS parameters F1 45° giuiori75 2 8,186 03-24-2016, 04:31 PM
Last Post: Max K
Shy TBS for Metco 450NS and AMDRY 2010 alvliew 3 4,235 06-14-2015, 10:59 PM
Last Post: Johnny_Blaze
  AMDRY 1718- Hardness alvliew 4 7,316 03-13-2015, 11:21 PM
Last Post: loriolo
  Melting, unmelted AlSi Microstructure Amdry 2010 powder William 4 6,196 08-26-2010, 04:00 PM
Last Post: Gordon
  Amdry 2010 & Metco 601 ykang 2 6,927 06-17-2008, 06:38 AM
Last Post: ykang



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd