AMDRY 500F
02-08-2010, 10:59 AM,
#1
AMDRY 500F
Hi Gordon and everyone,

I have interphase problems in spraying AMDRY 500F to Ti substrate. I have tried different grit blasting parameters to enhance surface properties and spray parameters to accelerate the splats to have better adhesion. Still the interphase has some oxide stringers and delamination. Can you please advise?

9MB Gun
732 nozzle
process gass: Ar/H2
Coating material: Cu-Ni-In (Fine)
Reply
03-01-2010, 12:26 PM,
#2
RE: AMDRY 500F
Hi AYKAC

These threads may be worth reading:

interface-separation-in-copper-nickel-indium-coating

interface-oxide

sand-blasting-on-titanium-substrate
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Starting parameters for Amdry 718 Cl.B edrazee 2 790 03-31-2020, 07:09 PM
Last Post: loriolo
  Amdry 9954 for titanium based alloy Bharti Malvi 6 3,432 12-21-2016, 07:39 PM
Last Post: Bharti Malvi
  Amdry 962 and Metco 204 NS parameters F1 45° giuiori75 2 6,437 03-24-2016, 04:31 PM
Last Post: Max K
Shy TBS for Metco 450NS and AMDRY 2010 alvliew 3 3,343 06-14-2015, 10:59 PM
Last Post: Johnny_Blaze
  AMDRY 1718- Hardness alvliew 4 6,049 03-13-2015, 11:21 PM
Last Post: loriolo
  Melting, unmelted AlSi Microstructure Amdry 2010 powder William 4 5,345 08-26-2010, 04:00 PM
Last Post: Gordon
  Amdry 2010 & Metco 601 ykang 2 6,035 06-17-2008, 06:38 AM
Last Post: ykang



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd