9mpe powder feeder

[Longman1]

Hi feeder
We have 9mpe powder

I would like to run it by itself to run a metco 6p gun

We have powder it up

Comes up external e stop must be cleared to continue

Any any body have the circuit diagram for this unit

Or any points which wires I need to jump

[loriolo]

Hi longman 1
This powder feeder is very complicated to run by yourself, you need a long training to know how it work, is a very complicated to use it at the begining, and as it's an fluidized bed powder feeder, and needs to much maintenance and to self-use it, you must know all the tricks.

[Longman1]

Hi longman 1
This powder feeder is very complicated to run by yourself, you need a long training to know how it work, is a very complicated to use it at the begining, and as it's an fluidized bed powder feeder, and needs to much maintenance and to self-use it, you must know all the tricks.

I’ve been in the spray game 30yrs
We have the plasma kit to go with it

But at the mo just need to run by itself

[loriolo]

Hi Longman
Maybe you misunderstand my comments, but I worked for many years working with this powder feeder, doing training and service, and every day was the first, and it work like all fluidized bed powder feeder, it has the carrier gas flow and pressure in dependence of the powder rate and is very difficult to set parameter, and it has rubber valves and tubes that broken very often, the best powder feeder as of course just you know are the twin type and PF50, what APS system do you have?

[ServiceTech]

You need an AC power cable and a control cable. Please call Metco Field Service for help as the 9MPE has Euro connectors and will require special cables.