88WC-12Co HVOF coating H2 contact
10-17-2016, 09:51 PM, (This post was last modified: 10-17-2016, 09:55 PM by Hector Monjardin.)
#1
88WC-12Co HVOF coating H2 contact
Good afternoon partners,

I have a question, Does any one have experience or know something about the interaction of a thermal spray coating 88 WC-12Co HVOF with Hydrogen (H2) and natural gas at approximately 150 celcius?? Is there a posibility of a chemical reaction??

I read something of mechanical seals and the WC-Ni materials have good performance, what do you think??

Regards.

Héctor Monjardin
Reply
10-18-2016, 01:22 PM, (This post was last modified: 10-18-2016, 02:19 PM by Vadim Verlotski.)
#2
RE: 88WC-12Co HVOF coating H2 contact
(10-17-2016, 09:51 PM)Hector Monjardin Wrote: Good afternoon partners,

I have a question, Does any one have experience or know something about the interaction of a thermal spray coating 88 WC-12Co HVOF with Hydrogen (H2) and natural gas at approximately 150 celcius?? Is there a posibility of a chemical reaction??

I read something of mechanical seals and the WC-Ni materials have good performance, what do you think??

Regards.

Héctor Monjardin

Hi Hector,
There is no reaction between WC-Co, WC-Ni and hydrogen or natural gas also at much higher temperatures than 150°C. Conversely, all of components (tungsten carbide, nickel and cobalt) "like" H2 and CH4, because by these gases, oxides of cobalt, nickel and tungsten can be revert to WC and metallic nickel or cobalt at high temperatures (> 800°C):

WO3 + CH4 + H2 = WC + 3H2O
Co(Ni)O + H2 = Co(Ni) + H2O
Co(Ni)O + CH4 = Co(Ni) + CO + 2H2 (Carbides of cobalt and nickel are not thermodynamically stable)

Regards
Vadim
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  High temperature sealers for food contact pcdmt 3 4,012 04-25-2019, 12:28 PM
Last Post: loriolo
  WC-12Co low hardness DanyGans 3 4,560 05-04-2018, 04:25 PM
Last Post: DanyGans
  HVOF 88 WC-12Co Cracking problem on wire drawing capstan Hector Monjardin 7 7,215 10-19-2016, 11:55 PM
Last Post: Hector Monjardin
  thikness of WC/12Co by HVOH mlavar 2 3,467 07-25-2013, 01:33 PM
Last Post: Met.Eng.
  Surface contact stress limit over an HVOF coating HVoilF 1 5,224 05-22-2013, 02:07 PM
Last Post: djewell
  Cracks in WC-12Co coating fhyuan 4 6,755 07-26-2012, 04:09 PM
Last Post: fhyuan
  Copper Contact to Gold Surface Design Question gpalermo 2 9,970 04-21-2008, 03:28 PM
Last Post: Gordon
Question 88WC - 8Co - 4Cr Removal Advice Batsy 2 7,637 02-05-2007, 09:21 AM
Last Post: Batsy



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd