Thread Closed 
2500 HP Diesel Engine piston liner
05-14-2011, 11:24 PM,
#1
2500 HP Diesel Engine piston liner
Hi everyone,

I want to some advices about marine application.
we want to coat 2500 HP water cooled Diesel engine's cylinder piston liners. 2 - 3 kg/cm2 water cooling pressure is cyclating arround the liner, and it takes the outside temperature of the liner 90 C. And the max temp. inside the liner is 900 C.

After 600 hours the pitting corrosion occure outside the liner, and at the 700 hours the liner crack.

material of the liner is cast iron.
the problem is pitting corrosion and abrasion(erresion) on the liner.

We want to coat outside the liner and extend the service life.
what kind of material i must choice? for HVOF (CrC-NİCr, WC Co Cr .... ect?)
05-15-2011, 03:33 PM,
#2
RE: 2500 HP Diesel Engine piston liner
Hi Metallurgy_eng

My first thought would be for a simple aluminium coating. I would consider this probably before HVOF stainless steels, inconels and hastelloys type coatings. I would not have thought abrasion/erosion in this situation would be severe enough to warrant carbide based coatings.
05-15-2011, 08:46 PM,
#3
RE: 2500 HP Diesel Engine piston liner
Hi gordon,

How can I attach some pohotos in there??? May be you want to take a look
05-16-2011, 02:10 AM,
#4
RE: 2500 HP Diesel Engine piston liner
Hi Metallurgy_eng

(05-15-2011, 08:46 PM)Metallurgy_eng Wrote: Hi gordon,

How can I attach some pohotos in there??? May be you want to take a look

If you are having problems attaching images to your post, just email them to me at sef@gordonengland.co.uk and I will insert them for you.
05-16-2011, 06:48 PM,
#5
RE: 2500 HP Diesel Engine piston liner
I sended to you some pic. Would you open again this topic? And can you put it the pic. under my post please Smile
05-24-2011, 02:51 AM,
#6
RE: 2500 HP Diesel Engine piston liner
(05-16-2011, 06:48 PM)Metallurgy_eng Wrote: I sended to you some pic. Would you open again this topic? And can you put it the pic. under my post please Smile

OK - done

This thread is now close. Please go to http://www.gordonengland.co.uk/sef/Threa...nd-erosion

Thread Closed 




Possibly Related Threads…
Thread Author Replies Views Last Post
  Hydraulic Piston rod demionkrishan 2 829 10-14-2019, 05:51 PM
Last Post: velocity
  WC-Co+NiCrBSi Applying on hydraulic piston rod Met.Eng. 4 2,925 05-09-2016, 05:45 PM
Last Post: Vadim Verlotski
  replacing hard chrome coating on piston grisen 3 3,428 10-08-2015, 12:07 PM
Last Post: Guner
  How to spray combustion chamber liner Michaellearnstocoat 5 4,283 09-06-2014, 09:24 AM
Last Post: Stephen Booth
  Alumina coating on piston divanis 7 6,967 03-13-2012, 10:59 PM
Last Post: loriolo
  High Pressure Piston Rods HVOF coatings HVoilF 14 20,568 12-24-2011, 10:20 AM
Last Post: k09
  HVOF Powder for Block Engine and Cylinder Liner minh_8888 1 3,268 06-21-2011, 02:28 PM
Last Post: Met.Eng.
  Marine Diesel Engine Liner mcg_pinsbushing 12 13,241 05-16-2008, 05:00 PM
Last Post: Gordon
  Chrome Carbide - Nickel Chrome or 95MXC in wire form for a Cylinder Liner? mcg_pinsbushing 0 6,481 05-07-2008, 10:00 AM
Last Post: mcg_pinsbushing



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd