Posted by Cristina (130.206.173.184) on 11:37:40 21/06/05
Dear sir or madam,
We are a small reseach group from Public University of Navarra in Spain. We are studing the process of gas nitriding on steels: F114, F125, F174, 3343 and 4401. There are two low alloy steels, one Nitralloy, one tool steel and one Stainless Steel. These have been procesed at 520ºC, for 8 hours and with a 30% of anmonia dissociation. We carried out microhardness and tribological tests, but our results (those regarding microhardness test) are very low, about 350 HV on white layer, and about 200 HV on the centre of the sample.
We Know that you have a lot of experience on this and I wonder if you could help us. I would be grateful if you could send us some results related to the microhardness test in order to comparing to ours.
Thanks a lot and sorry to bother you,
Sincerely,
Cristina
Cristina Díaz Jiménez,
Public University of Navarra, Spain
nitriding@hotmail.com
Fax: +34 94816909
Follow Ups:
Please go to the new Surface Engineering Forum as this old message board is a read only archive. Please copy and paste relevant information or link to the page if you wish to reactivate a thread on the new forum.
Introducing
Nature of Thermal Spray Coatings
Surface Engineering in a Nutshell
Surface Engineering Forum
Thermal Spray Gun Repair Service
Plasma Consumable Parts
Thermal Spray Powder Supplies
Applications:
Thermal Spray Coatings on Carbon and Glass Fibre Reinforced Polymers
HVOF Coating of Paper Making Roll
Abradable Coatings
Thermal Spray Processes:
Combustion Wire Thermal Spray Process
Combustion Powder Thermal Spray Process
Arc Wire Thermal Spray Process
Plasma Thermal Spray Process
HVOF Thermal Spray Process
HVAF Thermal Spray Process
Detonation Thermal Spray Process
Plasma Flame Theory
Cold Spray Coating Process
Wear and Use of Thermal Spray Coatings
Corrosion and Use of Thermal Spray Coatings
Glossary of Thermal Spray and Surface Engineering Terms
Image Directory for Thermal Spray Coatings
Plasma Gas Flow Information
Plasma Gas Flow Correction Calculator
Contact Form
Links to other interesting sites related to thermal spray and surface engineering
Reciprocal Links
Periodic Table of the Elements
SI Units
Calculators for Conversion between Units of Measurement
Hardness Testing
Surface Engineering Message Board Archive
Surface Engineering Message Board Archive Index
Photography Gallery2
Photography Gallery3
© Copyright Gordon England