Posted by Gordon England (22.214.171.124) on 12:23:13 20/06/05
In Reply to: APS NiCrAlY coatings posted by Karlos
: Hi, I need help
: I am new in metal spray.
: I have problem with NiCrAlY bond coat. I use F1 gun (APS) and I have big problem with globular oxidation.
: I used a typical parameter set from the spraying manual. I don't know which parameters are necessary to change
: to avoid globular oxidation in the coating. I am distressful and I don't know what to do to improve my process.
: Can anybody help me please?
: Thank you in advance.
Is it possible to see a photomicrogaph of the coating showing the problem? Very often these problems are not actually caused by the plasma gun settings, but through powder fines and spray debris being entrained in the coating. Check your powder. Slight changes in spray angle, traverse speeds, use of air jets may help.
Nature of Thermal Spray Coatings
Surface Engineering in a Nutshell
Surface Engineering Forum
Thermal Spray Gun Repair Service
Plasma Consumable Parts
Thermal Spray Powder Supplies
Thermal Spray Coatings on Carbon and Glass Fibre Reinforced Polymers
HVOF Coating of Paper Making Roll
Thermal Spray Processes:
Combustion Wire Thermal Spray Process
Combustion Powder Thermal Spray Process
Arc Wire Thermal Spray Process
Plasma Thermal Spray Process
HVOF Thermal Spray Process
HVAF Thermal Spray Process
Detonation Thermal Spray Process
Plasma Flame Theory
Cold Spray Coating Process
Wear and Use of Thermal Spray Coatings
Corrosion and Use of Thermal Spray Coatings
Glossary of Thermal Spray and Surface Engineering Terms
Image Directory for Thermal Spray Coatings
Plasma Gas Flow Information
Plasma Gas Flow Correction Calculator
Links to other interesting sites related to thermal spray and surface engineering
Periodic Table of the Elements
Calculators for Conversion between Units of Measurement
Surface Engineering Message Board Archive
Surface Engineering Message Board Archive Index
© Copyright Gordon England