Posted by Gordon England (62.252.0.12) on 14:42:47 07/02/05
In Reply to:Internal Coating of a Stack posted by Raghav
:pDear Gordon,
: What kind of arc spray coating would you suggest for internal coating of an exhaust stack, the temperature for which is between 100 deg C to 200 deg C.
: S02 and NOX are both present in the environment.
: SO2 - 2.98 P.P.M
: NOZ - 3.59 P.P.PM
: 140 deg C is tried to be maintained constantly. But when that does not happen and the temperature drops, the moisture mixes with the gases forming diluted H2SO4 AND HNO3.
: What kind of an arc spray coating would you suggest and is sealant required ? If yes What is the kind of sealant that is recommended.
: What is the life that can be expected of the coating ?
: Thanx,
: Regards,
: Raghav
I would consider aluminium as a sacrificial coating. Inconel 625 should be a good noble type coating, but needs to exclude environment 100% to be effective. A silicone based sealer for both coating types. Very difficult to give any prediction on service life.
Regards Gordon
Follow Ups:
Introducing
Nature of Thermal Spray Coatings
Surface Engineering in a Nutshell
Surface Engineering Forum
Thermal Spray Gun Repair Service
Plasma Consumable Parts
Thermal Spray Powder Supplies
Applications:
Thermal Spray Coatings on Carbon and Glass Fibre Reinforced Polymers
HVOF Coating of Paper Making Roll
Abradable Coatings
Thermal Spray Processes:
Combustion Wire Thermal Spray Process
Combustion Powder Thermal Spray Process
Arc Wire Thermal Spray Process
Plasma Thermal Spray Process
HVOF Thermal Spray Process
HVAF Thermal Spray Process
Detonation Thermal Spray Process
Plasma Flame Theory
Cold Spray Coating Process
Wear and Use of Thermal Spray Coatings
Corrosion and Use of Thermal Spray Coatings
Glossary of Thermal Spray and Surface Engineering Terms
Image Directory for Thermal Spray Coatings
Plasma Gas Flow Information
Plasma Gas Flow Correction Calculator
Contact Form
Links to other interesting sites related to thermal spray and surface engineering
Reciprocal Links
Periodic Table of the Elements
SI Units
Calculators for Conversion between Units of Measurement
Hardness Testing
Surface Engineering Message Board Archive
Surface Engineering Message Board Archive Index
Photography Gallery2
Photography Gallery3
© Copyright Gordon England