Posted by Gordon England on February 12, 2003 at 18:19:45:
In Reply to: Thermal spray coating on Turbine blades posted by sudhanshu gupta on February 12, 2003 at 13:20:58:
: We are an IPP and run our plant through 3GTs in combined cycle operation. TIT is 1060 to 1090 Deg. C.
: MCrAlY is applied on 1st and 2nd stage stationary vanes and rotating blades of the Gas Turbines.
: Lot of debate goes on, on which coating process to be applied ie whether LPPS/VPS or HVOF as widely varying experiences and practices are available thorugh out the Industry (Refurbishers and OEM including).
: 1) Could through detailed light on which proces is technically better over the other?
: 2) Some quantifiable details about commecial aspects of the these coatings?
: 3)Whether there is any difference between LPPS and VPS?
: Would await for your response.
: Regards
: Sudhanshu Gupta
: Engineering Services
: Gujarat Paguthan Energy Corporation Ltd.
: Bharuch Palej Road
: Village Paguthan
: Dist. : Bharuch, Gujarat, India
: PIN - 392015
: Tel . : +91 2642 288501; ext. : 1110
: Fax : +91 2642 288512
1. LPPS/VPS coating is probably technically better as the coatings will be diffusion bonded due to higher processing temperatures and contain less oxide. The components are usually put through a heat treatment cycle during processing. HVOF coatings one the otherhand can be applied without heat effecting the substrate metallurgy.
2. HVOF will have the advantage of being very much cheaper.
3. LPPS (low pressure plasma spraying) VPS (vacuum plasma spraying) are really the same.
Regards Gordon
Follow Ups:
Surface Engineering Forum
Surface Engineering Message Board Archive
Surface Engineering Message Board Archive Index
www.gordonengland.co.uk
Please go to the new Surface Engineering Forum as this old message board is a read only archive. Please copy and paste relevant information or link to the page if you wish to reactivate a thread on the new forum.
Introducing
Nature of Thermal Spray Coatings
Surface Engineering in a Nutshell
Surface Engineering Forum
Thermal Spray Gun Repair Service
Plasma Consumable Parts
Thermal Spray Powder Supplies
Applications:
Thermal Spray Coatings on Carbon and Glass Fibre Reinforced Polymers
HVOF Coating of Paper Making Roll
Abradable Coatings
Thermal Spray Processes:
Combustion Wire Thermal Spray Process
Combustion Powder Thermal Spray Process
Arc Wire Thermal Spray Process
Plasma Thermal Spray Process
HVOF Thermal Spray Process
HVAF Thermal Spray Process
Detonation Thermal Spray Process
Plasma Flame Theory
Cold Spray Coating Process
Wear and Use of Thermal Spray Coatings
Corrosion and Use of Thermal Spray Coatings
Glossary of Thermal Spray and Surface Engineering Terms
Image Directory for Thermal Spray Coatings
Plasma Gas Flow Information
Plasma Gas Flow Correction Calculator
Contact Form
Links to other interesting sites related to thermal spray and surface engineering
Reciprocal Links
Periodic Table of the Elements
SI Units
Calculators for Conversion between Units of Measurement
Hardness Testing
Surface Engineering Message Board Archive
Surface Engineering Message Board Archive Index
Photography Gallery2
Photography Gallery3
© Copyright Gordon England