Posted by Gordon England on February 04, 2003 at 14:46:57:
In Reply to: Copper Polishes posted by F Murphy on February 02, 2003 at 18:32:26:
: I am looking for Chemical Polishes for 99.9% Cu which has already been annealed for a Mech Eng Degree Project.
: Thanks for any recipes you can supply.
What is the purpose for the chemical polishing? Is it for cleaning, finishing or metallographic preparation?
These links may be of interest:
http://www.metallographic.com/3CU.htm
http://www.apec-vc.or.jp/co-op/mekki/docs/1_2_05.htm
http://chemelab.ucsd.edu/cmp02/project/results/ms_results.html
Regards Gordon
Follow Ups:
Surface Engineering Forum
Surface Engineering Message Board Archive
Surface Engineering Message Board Archive Index
www.gordonengland.co.uk
Introducing
Nature of Thermal Spray Coatings
Surface Engineering in a Nutshell
Surface Engineering Forum
Thermal Spray Gun Repair Service
Plasma Consumable Parts
Thermal Spray Powder Supplies
Applications:
Thermal Spray Coatings on Carbon and Glass Fibre Reinforced Polymers
HVOF Coating of Paper Making Roll
Abradable Coatings
Thermal Spray Processes:
Combustion Wire Thermal Spray Process
Combustion Powder Thermal Spray Process
Arc Wire Thermal Spray Process
Plasma Thermal Spray Process
HVOF Thermal Spray Process
HVAF Thermal Spray Process
Detonation Thermal Spray Process
Plasma Flame Theory
Cold Spray Coating Process
Wear and Use of Thermal Spray Coatings
Corrosion and Use of Thermal Spray Coatings
Glossary of Thermal Spray and Surface Engineering Terms
Image Directory for Thermal Spray Coatings
Plasma Gas Flow Information
Plasma Gas Flow Correction Calculator
Contact Form
Links to other interesting sites related to thermal spray and surface engineering
Reciprocal Links
Periodic Table of the Elements
SI Units
Calculators for Conversion between Units of Measurement
Hardness Testing
Surface Engineering Message Board Archive
Surface Engineering Message Board Archive Index
Photography Gallery2
Photography Gallery3
© Copyright Gordon England