thermal spray coating for Galvalume tank
08-20-2009, 02:57 AM,
#1
thermal spray coating for Galvalume tank
Dear All :
I am currently having a problem in find the suitable thermal spray coating for the hot-dip Galvalume ( 55%Al-Zn) tank. Since the erosion of the aluminum on the cobalt in the sprayed WC-12% Co, which resulted in rather short life span of the coating. Any suggestions on the viable coating material and spraying method will be highly appreciated.
Horsecheng, Taiwan
Reply
08-21-2009, 04:00 PM,
#2
RE: thermal spray coating for Galvalume tank
Hi Horsecheng

Sign0016 to the Surface Engineering Forum.

Plasma sprayed aluminium oxide ceramic coatings. Most metallic coatings will suffer attack from molten aluminium.
Reply
08-25-2009, 03:28 AM,
#3
RE: thermal spray coating for Galvalume tank
Dear Mr. Gordon :
Thank you very much for your reply. Would the aluminum oxide be too brittle due to differences in thermal expansion between the coating and substrate material ( stainless steel ) ? Best regards. Horsecheng
Reply
08-25-2009, 02:49 PM,
#4
RE: thermal spray coating for Galvalume tank
Hi Horsecheng

Yes, oxide ceramic coatings will by nature be more brittle and less mechanically durable than metallic based coatings. I think it is something you will have test for your specific application.
Reply
09-08-2009, 07:13 PM, (This post was last modified: 09-08-2009, 07:14 PM by djewell.)
#5
RE: thermal spray coating for Galvalume tank
My company has had excellent preliminary success using a molybdenum boride coating applied via AC-HVAF on galvalume sink rolls. So far, the rolls have outlasted the WC-Co coatings, but the tests are not complete yet. The molybdenum boride is not attacked by the liquid metal, and dross does not stick to it. You can contact me off-line for more information.
Reply
09-09-2009, 02:58 PM,
#6
RE: thermal spray coating for Galvalume tank
Hi djewell

Molybdenum boride coating sound interesting. Can you keep us updated on progress of your tests?
Reply
09-15-2009, 07:10 AM,
#7
RE: thermal spray coating for Galvalume tank
(09-08-2009, 07:13 PM)djewell Wrote: My company has had excellent preliminary success using a molybdenum boride coating applied via AC-HVAF on galvalume sink rolls. So far, the rolls have outlasted the WC-Co coatings, but the tests are not complete yet. The molybdenum boride is not attacked by the liquid metal, and dross does not stick to it. You can contact me off-line for more information.

Dear Djewell :
Thank you very much for the suggestion, I will try it and let all the interested parties to know the results. Best regards. HorsechengHappy0193
Reply
08-31-2010, 03:50 PM,
#8
RE: thermal spray coating for Galvalume tank
Please read the article in the August 2010 issue of Iron and Steel Technology on "A Novel Thermal Spray Coating for Galvanizing Rolls". You can contact the authors for more information.
Reply
08-31-2010, 04:25 PM,
#9
RE: thermal spray coating for Galvalume tank
Hi Horsecheng
First the sinc-rolls were copper coated and after this they applied a chrome plating coating, sometimes they used a molybdenum coating, but, lately application is a chrome carbide coating with a special anti sticking sealing, and on the bearing is applied a hard fused coating
Best regards
Luigi
Reply
05-07-2020, 03:08 PM,
#10
RE: thermal spray coating for Galvalume tank
(09-09-2009, 02:58 PM)Gordon Wrote: Hi djewell

Molybdenum boride coating sound interesting. Can you keep us updated on progress of your tests?
Hai Gordon
Do you have any update for coating on Galvalume tank rolls. I am looking for HVOF coating on Galvalume Rolls. Do you have any suggestion.
Reply
06-05-2020, 03:00 PM,
#11
RE: thermal spray coating for Galvalume tank
(08-20-2009, 02:57 AM)horsecheng Wrote: Dear All :
I am currently having a problem in find the suitable thermal spray coating for the hot-dip Galvalume ( 55%Al-Zn) tank. Since the erosion of the aluminum on the cobalt in the sprayed WC-12% Co, which resulted in rather short life span of the coating. Any suggestions on the viable coating material and spraying method will be highly appreciated.
Horsecheng, Taiwan

Hi Horse,

Coaitng applied for CGL roll is special, the best player is TOCALO Japan, they apply spcial powder and sealer with process. In case Taiwan, China steel and Hantai most usting this process.

Best Regards
Joe
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  THermal Spray and Hard Crome Coating Met.Eng. 4 5,560 07-11-2015, 03:40 PM
Last Post: Met.Eng.
  Thermal spray coating for Nitriding shantanu 4 5,653 04-25-2015, 08:47 AM
Last Post: Joris Kraak
  LPG tank mlavar 1 3,349 07-10-2013, 05:42 PM
Last Post: loriolo
  gypsum Tank shantanu 4 5,281 06-25-2013, 05:56 AM
Last Post: Vijay Deshpande
  Tank that cant be blasted, ideas? stuartred4d 9 7,989 06-25-2013, 05:51 AM
Last Post: Vijay Deshpande
  Thermal spray coating in Process Industries Chakraborty_P 8 10,288 08-29-2012, 02:43 AM
Last Post: ehasan
  Glass flake coating by thermal spray sreenuvundela 1 5,188 09-29-2011, 04:26 PM
Last Post: Vijay Deshpande
  Coating options for large carbon steel tank Jimmy D. 9 12,953 12-15-2010, 07:50 AM
Last Post: ives
  place propane tank upside-down as liquid service tank? pulaunias 7 31,235 10-18-2010, 05:19 PM
Last Post: djewell
  Auto scrapper for sink roll in galvalume line nettrade 0 5,599 01-12-2010, 03:55 AM
Last Post: nettrade
  thermal spray metco 204ns coating retlaw 2 9,463 09-11-2009, 02:24 AM
Last Post: Gordon
  Coating Solution for demineralized water storage tank Raghav 6 24,064 05-18-2009, 04:04 PM
Last Post: SimonH
  Thermal spray coating on semiconductor jeffsays163 2 7,322 01-03-2009, 02:20 PM
Last Post: jeffsays163
  Coating on Sodium Hypo Chloride - 6-14% active Chloride- tank iwan-sedaryawan 1 5,106 09-11-2008, 12:50 PM
Last Post: Gordon
  Thermal spray coating for Chimney inner wall jeffsays163 1 6,314 01-12-2008, 05:08 PM
Last Post: Vijay Deshpande



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd