testing of abradable coating
09-14-2007, 07:08 AM,
#1
testing of abradable coating
hi all

Can some body provide me information about the testing/qualification criteria of abradable coatings EXCLUDING metallography, tensile adhesion test & thermal cycling test.

Regards


Wasif
Reply
09-14-2007, 11:21 AM,
#2
RE: testing of abradable coating
Hi Wasif

Hardness testing is important and normally a required test for abradable (clearance control) coatings. Mostly the Rockwell superficial hardness test is employed using the HR15Y scale. The HR15Y hardness scale requires 1/2" diameter steel ball indenter with a total load of 15kg.

Try searching this forum and the old message board with "HR15Y" or "abradable". Try this link for more info on Rockwell Superficial Hardness Testing

The Google search on 'www.gordonengland.co.uk' (near bottom of page) works quite well as an alternative search method. Advantage being that its quick and searches all of the site, disadvantage being it will only show up google indexed pages.
Reply
09-19-2007, 05:39 PM,
#3
RE: testing of abradable coating
Thanks Gordon for guidance.


Wasif
Reply
03-18-2008, 04:45 PM,
#4
RE: testing of abradable coating
When I was developing abradables we had the following test requirements

Hardness
Scratch Hardness
Thermal Spallation Resistance
Erosion Testing
Abradability Test Rig

In this order to weed out candidates since the order is in increasing test costs.
Reply
03-19-2008, 03:51 PM,
#5
RE: testing of abradable coating
Hi Jerrythespritzer

Sign0016 to the Surface Engineering Forum.

Thanks for your input Big Grin
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  How to determine the porosity level of Metco 320NS abradable coating? viewwer 6 5,151 11-23-2015, 09:57 AM
Last Post: Joris Kraak
  abradable coating failure stvon 11 5,958 11-17-2015, 12:33 PM
Last Post: Joris Kraak
  Abradable Coating Thickness limitation wasif 1 2,652 07-28-2015, 10:57 PM
Last Post: Johnny_Blaze
  APS and HVOF coating testing Oeno 5 4,166 02-24-2014, 09:37 PM
Last Post: KevinS
  Erosion Test of an Abradable Coating baaddin 3 4,248 02-11-2014, 07:32 AM
Last Post: baaddin
  Abradable Coating-Bond Strength rayudugirish 9 11,177 01-06-2014, 09:55 PM
Last Post: derek
  Peel of coating during pressure testing raviswanadha 6 7,269 01-14-2011, 08:49 PM
Last Post: Gordon
  Bentonite Abradable-Erosion Testing gejohn 1 7,083 02-19-2008, 02:48 AM
Last Post: Gordon
  literature on abradable coating wasif 2 5,238 10-18-2007, 05:08 PM
Last Post: wasif
  hard AlSi-graphite abradable coating fhyuan 5 10,941 07-18-2007, 09:28 PM
Last Post: Gordon
  THICKNESS TESTING OF 316 L COATING Vijay Deshpande 1 6,596 02-02-2007, 04:14 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd