increase efficiency of LTH (Laser Transformation Hardening)
06-18-2007, 02:37 PM, (This post was last modified: 06-18-2007, 04:36 PM by Gordon.)
#1
increase efficiency of LTH (Laser Transformation Hardening)
hi, I would like to know aside increasing the power of the laser system, are there any other methods to increase the processing efficiency of laser transformation hardening.Smile
Reply
06-18-2007, 04:30 PM,
#2
RE: increase efficiency of LTH
Hi Melrose

Leaving aside laser power, frequency and footprint. The main thing that will effect process efficiency will be the absorption efficiency of work piece. Pre-treatment of the work piece by fine grit blasting and graphite coatings should increase absorptivity, thus increasing overall process efficiency.

Another thought, assuming we are talking about martensitic transformation of steel, is to be careful with selecting the optimum condition/microstructure for your steel. I would assume this is similar to induction hardening where coarse microstructures require higher temperatures or longer time at temperature to austenitise properly than fine microstructures.
Hardened and tempered/spherodised conditioned steels are usual best and again should increase process efficiency over using say annealed or normalised steels.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Voltage Increase in Sinplex pro Oerlikon Gun DMan 3 1,699 02-17-2023, 08:26 PM
Last Post: J!m
  Hardness increase in Chrome Ceramic Plasma Coating DMan 6 2,973 03-25-2021, 01:24 PM
Last Post: DMan
  Surface hardening [steel + steel alloys] haggis 1 3,682 07-09-2017, 12:42 PM
Last Post: plasmajet1990
  Laser cladding plungers Arturas 2 4,159 09-24-2016, 09:49 AM
Last Post: Vadim Verlotski
  Laser thermal cycle test Max K 0 2,909 03-01-2016, 04:03 PM
Last Post: Max K
  Technical Characteristics of Rich Laser Cladding Technology lijianping 0 3,176 05-17-2014, 06:15 AM
Last Post: lijianping
  Features of laser cladding lijianping 0 3,004 05-14-2014, 09:15 AM
Last Post: lijianping
  Laser metal cladding rechnology lijianping 0 3,977 05-14-2014, 09:01 AM
Last Post: lijianping
  Laser Cladding onto 17-4 PH Grayso 4 7,937 03-01-2014, 11:09 AM
Last Post: makankp
  How do you caculate deposit efficiency of thermal spray derek 2 6,310 02-25-2014, 08:10 PM
Last Post: Gordon
  How to increase coating hardness Airbin 2 9,153 11-20-2013, 11:10 AM
Last Post: Airbin
  Effect of weather on deposition efficiency Max K 3 5,582 08-06-2013, 04:40 PM
Last Post: GMA thermal spray systems
Sad how to increase hardness of CrC-NiCr Bler 10 10,847 01-06-2013, 09:54 PM
Last Post: loriolo
  Deposit Efficiency js2know 2 5,529 09-03-2012, 04:05 PM
Last Post: loriolo
  Measuring deposition efficiency and check the microstructures of the coatings??????? fahad03092 7 10,458 10-25-2011, 02:05 PM
Last Post: djewell



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd