fused coating
09-22-2009, 06:52 AM,
#1
fused coating
Hello,
We sprayed 3 meters length plunger with JK7660. And before fusing at the begining of plunger we did preheating (we reach temp.150C) what gives in the coating surface cracks (it looks as ground after a long time without water) Other part of this plunger we fused without preheating and quality of coating is ok.. Thickness of coating 0.7mm

Question is it possible to join already fused JK7660 coating with newly sprayed JK7660 and after fusing to avoid cracks.
Thank You
Arturas
Reply
09-26-2009, 04:21 PM,
#2
RE: fused coating
Hi Arturas

I have my doubts to it being problem free. But I suppose the component would have to be completely reworked anyway, so I think no harm in trying and learning from experience.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Adding new fused coating to old RAM 3 1,448 05-18-2017, 07:31 AM
Last Post: Vadim Verlotski
  Spray fused coating cracks Arturas 24 15,447 12-07-2016, 02:57 PM
Last Post: abhay
  Fused coating problem sprayloud 8 4,863 01-22-2016, 10:30 PM
Last Post: KevinS
  spray and fused coating Arturas 2 4,815 07-14-2007, 03:15 PM
Last Post: fhyuan



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd