ceramic coating
08-28-2009, 05:30 AM,
#1
ceramic coating
Dear All,
I have a project for inner ceramic coating, my question are :
1. do we need to undercut the object before we sprayed it? how deep we should undercut it? 2mm??
2. do we need a bonding material when we sprayed ceramic?

Thx

Br,
Reza Bertoni
Indonesia
Reply
08-28-2009, 11:35 AM,
#2
RE: ceramic coating
Hi Reza

Quote:1. do we need to undercut the object before we sprayed it? how deep we should undercut it? 2mm??

This will be dependent on the desired finished dimensions and the desired finished coating thickness.

Quote:2. do we need a bonding material when we sprayed ceramic?

In the majority of cases I would say yes.
Reply
08-29-2009, 02:40 AM,
#3
RE: ceramic coating
Hi Reza, there are many other considerations for the internal coating of ceramics.

What process and material are you using?

Is it a blind hole, meaning one end closed?

2 mm thick on ceramic, sounds very thick for most processes.

regards,

Stephen
Reply
09-01-2009, 09:55 AM,
#4
RE: ceramic coating
Hi Reza,

well...most of your queries have already been answered by gordon and stephen.

just wanted to add that for any cermaic coating, 2mm thickness is very high. a finished thickness range of 200 to 400 microns should give you optimal results. also ensure that when you deposit the the ceramic such that the substrate temprature doesnot exceed 100Degree C.

Also, you have mentioned ID coating. unless you have a ID gun, spraying a hole more that 2-3" long will not be possible as you can only tilt the gun upto a treshold limit (30-45 degrees from gun axis). tilting it further will reduce your deposition efficiency and increase shadow porosity drastically.

All the best...do let us know how u managed to do it..)
Regards

K09Mad0223
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Hardness increase in Chrome Ceramic Plasma Coating DMan 6 2,973 03-25-2021, 01:24 PM
Last Post: DMan
  ceramic exhaust coating soplillorfr 1 2,359 12-06-2020, 01:04 AM
Last Post: Stephen Booth
  Ceramic Coating on Aluminum Base metal demionkrishan 9 4,758 02-03-2020, 09:35 AM
Last Post: DMan
  Ceramic and metal coating powders JeanRellier 1 3,003 09-20-2017, 06:06 PM
Last Post: Vadim Verlotski
  Masking tape for high-heat ceramic coating. texnicar 1 4,135 04-21-2015, 04:09 PM
Last Post: cris1904
Lightbulb Ceramic Coating of Internal Diameters and Small Precision Parts Refmet 0 5,274 07-08-2014, 01:07 PM
Last Post: Refmet
Question Duplex Ceramic Coating k09 2 4,733 03-31-2010, 05:15 AM
Last Post: k09
  Ceramic flame powder coating result in Black colour iwan-sedaryawan 6 12,561 09-12-2008, 01:56 PM
Last Post: Gordon
  Ceramic coating on graphite plates ravi_n59 3 9,718 01-21-2008, 04:29 PM
Last Post: ravi_n59
Question Coating for ceramic composite tool murt100 3 8,110 02-07-2007, 06:36 AM
Last Post: drramc
  ceramic coating ckb 3 11,310 08-24-2006, 02:50 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd