YSZ deposited by Cold Spraying?
03-19-2014, 03:38 AM,
#1
YSZ deposited by Cold Spraying?
Hi everyone,

Do you think that Yttria Stabilized Zirconia can be deposited by Cold Spraying, say onto a temperature-sensitive substrate, for e.g a composite?

Thanks a lot Smile

Nadiir
Reply
03-19-2014, 08:26 AM,
#2
RE: YSZ deposited by Cold Spraying?
Dear Nadiir,

Cold spray process is highly suitable for metals of FFC structure such as Copper, Aluminum and Nickel etc but for carbides, ceramics (YSZ) and BCC structure metal coatings, cold spray process may not good option. This process may develop very thin coatings (less than 50 microns) with poor coating characteristics for carbides, ceramics and Mo type of metals.

FOR YSZ coating APS process is the best option and for carbides, HVOF process is the best option
Reply
03-21-2014, 03:00 AM,
#3
RE: YSZ deposited by Cold Spraying?
Dear Sreenuvundela,

Thanks for the suggestions. In that case, the YSZ will erode the composite substrate when cold spraying is employed.

Are there any factors/characteristics (materials science or mechanical properties) that may help me to choose which spray materials can be used for cold spraying, in addition to the fact that the metals should consist of a FFC structure?

Actually, I would like to spray a non-metallic material onto a composite substrate.

p.s: The above trial may not be favorable but at least I could know the justifications.

With Thanks,

Nadiir
Reply
03-21-2014, 06:47 AM,
#4
RE: YSZ deposited by Cold Spraying?
Hi

Kindly follow latest updates on cold spray technology through net or journal of TSA (Thermal spray association).

Cold spray technology is new for job shops, hence you have to depend on R &D data only.


Regards,

SREENIVAS




Reply
03-22-2014, 11:26 AM,
#5
RE: YSZ deposited by Cold Spraying?
Dear Sreenivas,

Indeed. And thanks for the tips!

Regards,

Nadiir

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Cold rolling plasmajet1990 2 2,837 02-24-2017, 09:23 AM
Last Post: plasmajet1990
  Cold Spray with Tungsten Carbide LLBHW 3 12,684 04-24-2015, 01:06 AM
Last Post: Fermit
  Cold Spray Coatings on Titanium balance 4 8,695 04-24-2015, 12:59 AM
Last Post: Fermit
  Cold Spraying & Cold spray combustion PPSABoyce 2 5,214 03-12-2012, 02:17 PM
Last Post: loriolo
  Air Bubble defects in 75Cr3C2 -25NiCr Coatings deposited by detonation Spray System - sreenuvundela 11 12,257 09-10-2011, 05:14 AM
Last Post: LEN WOOD
  Cold Spraying porosity attin 4 7,095 03-09-2010, 04:30 PM
Last Post: drramc
  Cold spray Florin 3 5,827 02-22-2010, 12:39 AM
Last Post: cmkay@asbindustries.com
  Cold spraying titanium nitride AnthonyE 4 7,696 11-13-2009, 11:26 AM
Last Post: SimonH
Question Hot or cold process? Gordon 3 6,606 06-23-2008, 05:08 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd