WC\Co + NiCrBSi
05-05-2011, 12:52 PM,
#1
WC\Co + NiCrBSi
Has any body try to coat WC\Co + NiCrBSi with HVOF. After coating can we do fusing? Please Tell us an information about coating and fusing.
Reply
05-05-2011, 01:07 PM,
#2
RE: WC\Co + NiCrBSi
Hi Metallurgy_eng

Yes and yes. Can be used as-sprayed or fused. Just make sure you get a suitable powder particle size for your process. Diamalloy 2002, Metco 34FP certainly spray well through DJ producing dense as-sprayed coatings. These coatings also fuse extremely well, better than comparable low velocity combustion spray coatings.
Reply
05-05-2011, 02:33 PM,
#3
RE: WC\Co + NiCrBSi
We have experience in deposition such coating.In the relative frequency ultrasound on the radiator, arresting gear, etc.Depending on the requirements of fusing the coating can be or do or not.This is an additional and expensive operation.The porosity of such HVOF coatings less than 1%. Fusing increases adhesion.Such coatings are well deposited and beautifully grinding conventional grinding wheels, unlike coatings WC, where you can grind only diamond wheel.

Coating is an art, and here we must feel and experience.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  NiCrBSi coating by DJ2600 Zhao Yun 6 1,291 12-05-2022, 03:43 AM
Last Post: Zhao Yun
  WC-Co+NiCrBSi Applying on hydraulic piston rod Met.Eng. 4 4,823 05-09-2016, 05:45 PM
Last Post: Vadim Verlotski
  How to Fuse a NiCrbSi (16C) in a oven? Joris Kraak 4 6,165 04-01-2014, 05:47 AM
Last Post: Stephen Booth
  Proper mixing of NiCrBSi with WC/Co Arturas 1 3,441 01-02-2014, 06:40 AM
Last Post: sprayjet
  [split] NiCrBSi - Abrbreviations bhellman 1 5,793 07-19-2007, 12:13 AM
Last Post: Gordon
  NiCrBSi lenicacraint 8 14,375 07-18-2007, 10:58 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd