WC-CO-CR hvof coating thickness measurement on Base SS 316L
06-10-2019, 07:35 PM,
#1
WC-CO-CR hvof coating thickness measurement on Base SS 316L

Dear HVOF coating expert,researcher

i have applied 86WC10Co4CR hvof coating on SS 316 ,how can i measure coating thickness ????whch kind of DFT meter will be helpful ??/ i have tried with eddy current based and electromagnetic based DFT meter but none of them give me perfect result..
all DFT meter shows false reading ??is there any DFT meter available in the world

which can measure coating thickness of conductive material wc-co-cr on base substrate non ferrous & conductive SS 316 material ??/



thanks in advance
Reply
06-14-2019, 01:45 PM,
#2
RE: WC-CO-CR hvof coating thickness measurement on Base SS 316L
Hi Virani
Time ago I measured TSA thickness on AISI 316 with NDT ultrasonic thickness gauge, in order to know all particular thickness and to know coating thickness by difference between before coating and after coating reading, important to sign the exact position where you take the measure before and after coating, I think that could work with Wc10Co4Cr with an adeguate point calibration for the coating and base materials
Best regards
Luigi
Reply
06-18-2019, 05:00 PM,
#3
RE: WC-CO-CR hvof coating thickness measurement on Base SS 316L
(06-14-2019, 01:45 PM)loriolo Wrote: Hi Virani
Time ago I measured TSA thickness on AISI 316 with NDT ultrasonic thickness gauge, in order to know all particular thickness and to know coating thickness by difference between before coating and after coating reading, important to sign the exact position where you take the measure before and after coating, I think that could work with Wc10Co4Cr with an adeguate point calibration for the coating and base materials



Hi loriolo,
Thanks for sharing valuable information
as per my knowledge ,after coating all marks will be disapear ,is there any tricks which can work to check coating thickness ???/
Reply
06-20-2019, 09:16 AM,
#4
RE: WC-CO-CR hvof coating thickness measurement on Base SS 316L
Hi virani
only meccanical measured points or doing a metal sheet mask with positions
Best regards
Luigi
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
Question CTE Measurement - How To EmilAV 8 2,949 10-28-2022, 09:36 AM
Last Post: SakshiVerma
Video Repair of base material defect after HVOF Coating Pranab_hvof 2 4,594 06-27-2022, 12:20 PM
Last Post: sushil1405
  Coating Thickness Measurement Equipment Taz 3 3,815 08-06-2021, 04:14 PM
Last Post: Lemster68
  Amdry 9951. Anyone know the maximum coating thickness Antcarroll 2 2,239 01-29-2021, 08:17 AM
Last Post: loriolo
  Ceramic Coating on Aluminum Base metal demionkrishan 9 4,741 02-03-2020, 09:35 AM
Last Post: DMan
  TSA coating applied to 316L pipe MIKEOKEEFE63 2 4,988 06-10-2019, 07:25 PM
Last Post: JRB VIRANI
  Roughness Measurement Standard Taz 1 2,199 02-08-2019, 07:01 PM
Last Post: Lemster68
  HVOF Determining Coat Thickness Josgates 1 3,098 11-10-2018, 11:20 AM
Last Post: Met.Eng.
  Good preparation for cast iron base material plzc126330 3 4,152 11-24-2016, 01:17 AM
Last Post: plzc126330
  Abradable Coating Thickness limitation wasif 1 4,248 07-28-2015, 10:57 PM
Last Post: Johnny_Blaze
  The thickness of coating minh_8888 5 6,879 03-25-2015, 10:31 AM
Last Post: Dr.Boris A.Eizner
  Drum Thickness Coating Requirement for SS316. samshah 0 2,906 11-13-2014, 04:56 PM
Last Post: samshah
  coating thickness Brent 7 8,166 03-09-2013, 11:56 AM
Last Post: sreenuvundela
  Spray and Fuse Co-base or Ni-base alloy on Inconel 718 Frank 1 4,228 09-23-2012, 01:12 PM
Last Post: Gordon
  uneven Wc coating thickness Brent 5 6,999 01-20-2012, 04:13 AM
Last Post: KevGarty



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd