ULTRASONIC TESTING OF THERMAL SPRAYED COATINGS
12-25-2006, 07:18 AM,
#1
ULTRASONIC TESTING OF THERMAL SPRAYED COATINGS
Dear all, i would like to know whether it is possible to carry out UT on Thermal sprayed deposits?
Reply
12-26-2006, 01:01 PM,
#2
RE: ULTRASONIC TESTING OF THERMAL SPRAYED COATINGS
vijaydeshin Wrote:Dear all, i would like to know whether it is possible to carry out UT on Thermal sprayed deposits?

Dear Mr Vijay

first of all you should be clear about ur question

there are so many kind of UTs and thermal spray coatings
and mension the purpose of testing also.

then u can get the most appropriate answer in this forum
ok

thanks for ur question
and welcome to the surface engineering forum
Reply
12-26-2006, 02:05 PM,
#3
RE: ULTRASONIC TESTING OF THERMAL SPRAYED COATINGS
Dear Mr.Karunanidhi,
I would like to carry out Ultra Sonic testing on Bearing Areas of a ID Fan shaft to determine good bonding between base and sprayed material. This is what my customer is insisting.
Thanks
Vijay Deshpande
Reply
12-27-2006, 06:16 PM,
#4
RE: ULTRASONIC TESTING OF THERMAL SPRAYED COATINGS
Hi vijaydeshin

You can apply ultrasonic NDT on thermal sprayed coatings; problem is the interpretation of the results. The coatings have multiple boundary interfaces between particles as well as to the substrate, along with porosity, oxides etc. which all tend to reflect a fog of information. If you try this technique you will need to do much testing and calibration. This method is rarely used with thermal spray coatings.
Reply
01-04-2007, 08:37 AM,
#5
RE: ULTRASONIC TESTING OF THERMAL SPRAYED COATINGS
Vijaydeshin,

I do not understand why your customer insists on this test to test the bod strenght of the coating. You should be in the position to advice him to do a full metallorgraphy evaluation instead. Spray the same coating using the same set-up to a specimen which is of the same parent material, send for testing, bond test, hardness test, and microstructure test.

Your customer shd be able to accept your proposal.

Regards,
Alex
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Machining of thermal sprayed coatings ServiceTech 4 9,521 08-14-2023, 09:00 PM
Last Post: J!m
  Environmental affect on plasma sprayed coatings nshepher 0 2,293 06-26-2018, 09:43 PM
Last Post: nshepher
  Thermal spray coatings over carbon fiber substrate Hector Monjardin 5 6,616 11-18-2015, 04:00 PM
Last Post: Hector Monjardin
  Electroplating Vs thermal spray coatings shantanu 1 5,336 04-10-2014, 07:16 AM
Last Post: sreenuvundela
  Thermal Spray Coatings Vijay Deshpande 2 5,355 03-25-2013, 12:29 PM
Last Post: Vijay Deshpande
Information Chrome oxide thermal sprayed coatings shelf life Leanne 1 4,390 02-14-2013, 02:18 PM
Last Post: Gordon
Exclamation Cleaning Ceramic (Chrome oxide) coatings - as-sprayed Leanne 1 4,642 02-04-2013, 08:18 PM
Last Post: kschewe
Cool Instrument to check coating thickness of Thermal Barrier Coatings odski0317 5 17,687 12-01-2010, 10:09 AM
Last Post: dienngothe
  smooth as-sprayed carbide coatings durkie 4 8,721 04-26-2009, 06:34 PM
Last Post: durkie
  Book - "Thermal spray coatings & technology" farzin_g1 1 5,912 01-05-2009, 11:06 AM
Last Post: Gordon
  Thermal Spray Coatings onto CFRP Voivod 4 8,135 04-15-2008, 10:27 AM
Last Post: Gordon
  Thermal Sprayed WC against TiC ruskasinthehouse 1 4,977 05-30-2007, 01:41 PM
Last Post: Gordon
  SHRINKAGE OF ARC SPRAYED COATINGS Vijay Deshpande 3 10,181 02-12-2007, 11:25 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd