UK thermal spray service required
03-31-2010, 08:56 AM,
#1
UK thermal spray service required
Hi all,

I'm looking for a thermal spray service based in the UK. I need gas turbine engine (non flight) components spraying with APS and flame coatings, typically Metco 450, 101, 308 etc. The main parts would be seals, cases and spools. I'm not looking to coat blades at this time.
Ideally operating with ISO accreditation you must be flexible and able to offer a good lead time.
I do have some particular requirements, such as coating analysis techniques, process and quality control and I would have to complete a site audit of your facility and quality system.

If anybody has appropriate facilities and is interested in taking on this work please get in touch via the PM service.

Jim
Reply
04-06-2010, 02:16 PM,
#2
RE: UK thermal spray service required
Hi Jim

PM sent Smile
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Metco 11E operator and service manual MVagusta 6 10,844 04-13-2019, 05:11 PM
Last Post: RomanJ67
  Thermal Spray Operator required SSCC 1 2,475 10-17-2018, 09:39 PM
Last Post: longman1971
  Problem solved service and calibration 2DOGSTAR 0 2,863 09-14-2016, 02:27 PM
Last Post: 2DOGSTAR
  Online Characterization of Particles during Thermal Spray & Cold Spray Processes Parat Tech 2 4,895 12-07-2015, 08:26 AM
Last Post: RV_DMG
  Second Hand Chiller Required RV_DMG 0 2,537 04-16-2015, 02:27 PM
Last Post: RV_DMG
  Distributor required for TS equipments sale Harry 0 4,078 11-08-2013, 07:50 AM
Last Post: Harry
  OSU thermal spray xephaoma 6 11,606 05-29-2011, 12:15 AM
Last Post: xephaoma
  Complete APS and flame system required TurbineRepair 4 7,733 12-06-2010, 12:22 PM
Last Post: 2DOGSTAR
  DJ Manual Gun Required 2DOGSTAR 2 6,441 10-30-2010, 05:19 AM
Last Post: young31
  coating service Do-Talent 0 4,161 03-05-2009, 04:27 AM
Last Post: Do-Talent
  Hardness testing machine - service organisation harryp 4 11,176 06-18-2008, 09:34 AM
Last Post: timequipment
  Metallurgical Service: Coating Condition, Quality, and Failure Analysis hwang 0 4,850 04-20-2007, 12:03 PM
Last Post: hwang



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd