Tungsten Carbide HVOF Removing.
10-14-2008, 07:37 PM,
#1
Tungsten Carbide HVOF Removing.
Hello.

I am looking for how to remove full coating WOKA 3602 HVOF process.

Two cases diferents substrates:

DIN 1.2379.
Cast Iron GGG70.

I'm Thincking try remove by machining. But i do not know how impact residual stress in the substrate. If can we have any risk??


Thank you for your attention
Reply
10-15-2008, 04:17 AM,
#2
RE: Tungsten Carbide HVOF Removing.
Kiroga,

Machining is definitely the best and fastest way. Alternative maybe waterjet.
Depends on the coating thickness, part configuration, the machining method, (single point cutting ..etc) the rotating speed if your part is a cyclindrical shape, ID/OD or on flanges where the coating deposit.
Reply
12-04-2008, 04:03 PM,
#3
RE: Tungsten Carbide HVOF Removing.
you can remove some carbide coatings chemically, although there are only a few people that can do it in the uk due to the amount of cyanide (i believe) that is used. alternatively you can use a reverse electrolitic process to remove some tungsten carbide coatings. The key factor in stripping this sort of coating seems to be destroying the binding agent (cobalt in the case of 86/10/4, quite possibly in others also)

depends on the application really, i know we have to strip parts from time to time, and there is no real way you could machine the coating off (our parts) practially.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Tungsten Carbide Microfinish engineerraj 15 16,632 02-17-2023, 09:41 PM
Last Post: J!m
Photo Pitting in HVOF Tungsten Carbide mrobie 4 2,248 08-31-2022, 02:08 PM
Last Post: Red Baron
  Request for solution to reduce porosity in HVOF Tungsten Carbide Coatings sreenuvundela 7 12,266 07-22-2020, 08:01 AM
Last Post: Simon Kim
  Chromium carbide parameters for HVOF JP500 Jaryn 2 2,686 07-01-2020, 04:27 PM
Last Post: ap-praxair
  Tungsten Carbide HVOF Removal PrecisionCarbide 9 14,103 02-24-2020, 11:17 AM
Last Post: Packiaraj Mutharasu
  roller surface high roughness Tungsten carbide coating Ra 0.15-0.3mm zhuminkun 6 5,067 02-08-2019, 04:59 AM
Last Post: Taz
  Dark surface after grinding of plasma tungsten carbide coating Lazha 1 3,735 05-31-2017, 12:07 PM
Last Post: loriolo
  HVAF tungsten carbide to replace hard chrome - Help??!!! Adamreis 2 4,111 02-20-2017, 11:04 PM
Last Post: Vig
  Effective Way of Testing hardness of Tungsten Carbide MANGESH 2 7,351 12-03-2015, 09:25 PM
Last Post: alaskangrown
  Tungsten Carbide coatings Sealants sorousheti 5 7,813 11-23-2015, 10:18 AM
Last Post: sorousheti
  Cold Spray with Tungsten Carbide LLBHW 3 12,647 04-24-2015, 01:06 AM
Last Post: Fermit
  HVOF Tungsten Carbide - New Line Setup David 1 4,988 08-16-2014, 03:51 PM
Last Post: Gordon
  Tungsten Carbide HVOF Coated Ball Valves grinding and Lapping constraints --- Reg sreenuvundela 4 11,387 07-29-2013, 09:04 AM
Last Post: Met.Eng.
  Buffer or build up layers under HVOF Carbide Coatings Stephen Booth 12 18,875 05-19-2011, 11:00 PM
Last Post: Met.Eng.
  Tungsten Carbide coating Guna 1 6,553 05-25-2010, 07:54 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd