Thermal Spray Coatings
03-18-2013, 05:45 AM,
#1
Thermal Spray Coatings
Dear All,
What Type of arc sprayed coating will withstand following conditions.

1) H2S ( hydrogen sulphide ) content = 10,0000 ppm .
2) Salanity (chlorine content ) = 40,000 ppm .
3) Temperature = 100ÂșC .
4) Pressure = 8 bar .

Vijay
Reply
03-23-2013, 10:53 AM, (This post was last modified: 03-23-2013, 10:55 AM by loriolo.)
#2
RE: Thermal Spray Coatings
Hi Vijay
I think the only solution in this case, if, it is only corrosion protection, is Aluminum arc spray, about 200 micron, sealed whit a product in accord with working temperature, for example: amercoat 878 series, Aremco CP 4010-542-529, it's very important if you must coat the inside of a tank, to be sure that the sealant coating do not has any porosity, maybe doing a spark test.
Best regards
Luigi
Reply
03-25-2013, 12:29 PM,
#3
RE: Thermal Spray Coatings
Thanks alot for your advice.
Regards.
Vijay
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Machining of thermal sprayed coatings ServiceTech 4 9,560 08-14-2023, 09:00 PM
Last Post: J!m
  Thermal spray coatings over carbon fiber substrate Hector Monjardin 5 6,637 11-18-2015, 04:00 PM
Last Post: Hector Monjardin
  Cold Spray Coatings on Titanium balance 4 8,695 04-24-2015, 12:59 AM
Last Post: Fermit
  Electroplating Vs thermal spray coatings shantanu 1 5,352 04-10-2014, 07:16 AM
Last Post: sreenuvundela
Information Chrome oxide thermal sprayed coatings shelf life Leanne 1 4,404 02-14-2013, 02:18 PM
Last Post: Gordon
  Color Difference in Ceramic coatings of Plasma Spray sreenuvundela 2 5,982 01-01-2013, 08:30 PM
Last Post: loriolo
  Air Bubble defects in 75Cr3C2 -25NiCr Coatings deposited by detonation Spray System - sreenuvundela 11 12,257 09-10-2011, 05:14 AM
Last Post: LEN WOOD
Cool Instrument to check coating thickness of Thermal Barrier Coatings odski0317 5 17,699 12-01-2010, 10:09 AM
Last Post: dienngothe
  Book - "Thermal spray coatings & technology" farzin_g1 1 5,918 01-05-2009, 11:06 AM
Last Post: Gordon
Sad different nozzles of a spray gun can be used for the same coatings? fhyuan 2 5,477 05-18-2008, 10:29 PM
Last Post: hvofhamid
  Thermal Spray Coatings onto CFRP Voivod 4 8,147 04-15-2008, 10:27 AM
Last Post: Gordon
  ULTRASONIC TESTING OF THERMAL SPRAYED COATINGS Vijay Deshpande 4 11,094 01-04-2007, 08:37 AM
Last Post: Alexangel1226



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd