TBC Coating change to grey
03-06-2009, 05:49 PM,
#1
TBC Coating change to grey
Hi,
Have a question to coating experts. Why the TBC Coating (not sure but think it is 8% YSZ) changes to grey color after part aging, then change back to yellow again after TBC bake-up heat treatment?

Also, the bake-up heat treatment change the TBC more yellowish comapred to as-coated TBC, Is it because the oxidation ? What is the benefit to TBC from backup process? Have anyone seen academic papers talking about this?

Thanks in advance
Hong
Reply
03-09-2009, 05:02 PM,
#2
RE: TBC Coating change to grey
Hi Hong

https://www.gordonengland.co.uk/sef/Thread-Colour-TBC may be worth reading if you have not already Smile
Reply
02-02-2023, 04:50 PM,
#3
RE: TBC Coating change to grey
(03-09-2009, 05:02 PM)Gordon Wrote: Hi Hong

colour-tbc-t-223.html may be worth reading if you have not already Smile

Dear Gordon!

Could you possibly provide another link? This one colour-tbc-t-223.html doesn't work (404 error)

Thanks in advance 

Regards,
Artyom
Reply
02-02-2023, 05:47 PM,
#4
RE: TBC Coating change to grey
Hi Artyom,

https://www.gordonengland.co.uk/sef/Thread-Colour-TBC
Reply
02-05-2023, 05:37 PM,
#5
RE: TBC Coating change to grey
(02-02-2023, 05:47 PM)Gordon Wrote: Hi Artyom,

https://www.gordonengland.co.uk/sef/Thread-Colour-TBC

Hello Gordon,


I also encountered this "anomaly", but I did not worry because I had the following explanation in my mind:

The eye perceives the electromagnetic radiation (light) reflected by the analyzed object.
The perceived color is given by the wavelength of the reflected radiation.
The radiation that is not absorbed by the object is reflected and depends on the distance between the atoms (I won't go into details).
In our case, the YSZ layer has a certain crystallization form that determines the distance between atoms.
Very briefly: Depending on the temperature, the YSZ layer changes its crystallization form - changes the distances between atoms - changes the color we perceive.
Between the minutes: 1.57-3.57 and 4.20-5.30 you can see the color change of the samples.


https://www.youtube.com/watch?v=xVVrH89eOug

The parameters used for APS deposition do not influence the color. The temperature of the substrate influences the color.



Ion
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Dimension change after grit blasting TomasCro 7 10,707 07-10-2023, 07:08 AM
Last Post: anilsingh012
  Consumables for cylinder block made of grey cast A_Hanert 2 4,112 06-25-2014, 10:19 AM
Last Post: A_Hanert
  Chrome Carbide & T800 Coating Property Change after heat treatment Alexangel1226 5 14,702 09-30-2010, 03:04 AM
Last Post: arjfaye06
Sad Dark grey particles in Ni-Al bond coat? fhyuan 9 12,286 01-18-2009, 07:02 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd